| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |
|
||||
Autor
|
Thema: Swedish Military Paint (Gelesen 2265 mal) | |||
| ||||
|
Hello Claas and other Members.
With the 1k top coats from http://www.militaerlacke.de/ do you need a hardener? I bought enough 4 colour paint to do my whole C304 but I am having trouble. (I am in the poopa!!!) The Instructions were in German and the emails claimed the paint was enamel when I found out the only thinners to work with the paint was acrylic thinners. Maybe the original thinners had hardener in it. The problem was I could not bring original factory thinners from the manufacturer into Australia with the paint shipment. My problem is that when I spray the the paint it does not harden (stays quite soft). Then when I spray the original matt coating over the new paint Iwould get a hard coat but it does not last in high UV Australian environment. Can any one advise me please-- or is willing to act as an interpreter to communicate with the manufacturer to see what is required for a suitable paint job. Johnny | ||||
johnny
|
||||
| ||||
|
Hi Claas. I am using a spray gun(SATA) with 1.4mm needle.
Is the normal thinner dilution 10%? I tried that and the mixture seemed too thick compared to other Acrylic paints I sprayed in the past. Militarlacke Thinner can you verify it the thinner used for their 1K paint is Enamel (old terchnology) modern Acrylic.? Ioriginally tried a paint sample with local enamel thinner but the paint would not dissolve easily and started to coagulate. cheers Johnny | ||||
johnny
|
||||
|
||||
| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |









Autor








Gespeichert