| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |
|
||||
Autor
|
Thema: Parabolic Leaf Springs. (Gelesen 5084 mal) | |||
| ||||
|
Hello all,
Many of us in the C303 facebook group have a list of owners that would purchase a set of parabolic springs and Heystee has agreed to make a new run of springs if we get to 40 sets (80 total). So far we have 22 but if there is any interest in being added to the list just add yourself to the list attached. The cost would be around 165€ per spring. Feel free to message me with any questions. Information on parabolics. http://www.parabolicsuspension.com/volvo/c303.htm And the list https://docs.google.com/spreadsheets/d/1io74_jak_i-bX-LMYL1GwBjlen_9SuJ3_o90GrmtVwc/edit#gid=0 | ||||
|
||||
| ||||
|
Fortunately we do not have that here. The only time your classic doesn't qualify for historic is if it is changed beyond a certain percentage but springs and suspension is normally not a part of that. Normally engine, trans and substantial body modifications. This does vary by state but doesn't seem that strict (maybe California is).
Anyways, I just wanted to post it here for visibility so that c303 owners were aware of the option if they so desired. ![]() | ||||
|
||||
| ||||
|
Just a quick update. Heystee has lowered the quantity required to start a production run to 40 springs (20 sets). We are now at 32 springs (16 sets). The cost for lowering it from 80 to 40 sets is only 10 GBP per spring so now 175.
Just FYI. Thank you! ![]() | ||||
|
||||
| ||||
|
Another update. We are at 77 springs and will be keeping the list open until September 1 then we will close out and process the orders.
![]() | ||||
|
||||
| ||||
|
Ok, for those who do not have Facebook access there are many details about this posted there. I am posting those details here to help assist for those who do not have access.
Parabolic Springs (Part 2). Ok it looks like we are at 81 springs as of 08/29. I have posts up in c303(de), Terrangbil(se), Real4x4(us) and the Dutch C303/TGB facebook group. I've asked that Paul provide expectations on production time just so that we are all on the same page. There are still some in these groups who have expressed interest so I would like to give them a little time before moving forward. I have also asked Paul to provide the process moving forward to ensure that when the time comes that we are all paid up and ready to move forward. Just to recap the cost for springs within the following quota targets are 175£ per spring (40 units) and 165£ per spring (80 units) give or take a few. Also consider: 1). If you want spares now is the time to change qty because I'm not sure how long it would take to find another opportunity to score parabolic springs once this run is complete. No pressure, just be mindful that this is a custom run on springs not mass produced or available outside of a used purchase or a group run. 2). If you know someone who has a TGBx/C30x but are not on social media reach out to them and inform them so they have equal opportunity to participate. 3). If there are still questions looming now is the time to ask! ![]() ------------------------------------------------------ Questions / Answers: 1). Spring rate is 42 N/mm, spacing between the buffer and the spring unladen should be between 50-70mm. Vehicle will sit slightly higher than new stock springs. 2). Springs do not require uprated shocks. Body roll is minimal and predictable. Shocks only affect roll rate. As with any vehicle if the rest of your suspension is old and needing maintenance then these items should also be addressed. 3). Production time is 30 days plus 1/2 weeks ship time which varies based on location. So US and Australia might see longer waits but not that much longer. Cost will of course vary based on location also but local pickup is allowed. 4). Bushes. There are a few options. One is to have the factory press in the OEM bushes if you provide them or you can press them yourself once the springs arrive. If you are wanting other non-OEM bushing options then that needs to be discussed also. 4a). Bushes/recap. Working hard to avoid confusion on this. Since this is a custom run we have options but along with those options comes complexity. Complexity because we are not dealing with a standard build nor are we dealing with a standard vehicle. That being said, the standard bushings that used to come with the springs and that can still come with the springs are the rubber (Colmar) and those require around a 5mm spacer on each side when mounted. There is also a PU option which is a PU bushing with an 18x85mm tube but there is no pricing on that as PU bushes have to be made. Paul is looking into the cost but it should fall into the standard cost for PU bushes. I am having Paul make me a set of Delrin bushings also but for which I have no cost yet. If you are interested in this option feel free to list it on the form. I am having my bushings pressed locally. 5). Payment. Paul is setting up a Paypal group for this production run. This gives you the buyer certain protections as in paypal will handle any issue resolution well within the production run and past delivery of said product (up to 180 days). If for some reason you don't feel that you are able to do paypal please speak up now. Just keep in mind that the goal here is to also keep this as simple as possible not make it more complicated. 6). Spring color. Many have complained about the blue. A change in color is permitted however it may be that the change be made for the entire run and not individually. If so we need some feedback if you are on the list. 7). Cost of extra leafs - update coming soon. And for reference below is the list being provided to Heystee once the we close up the run. September 1, 2018 has been targeted as the date we move forward into the next stage so that's this weekend. Just FYI. ![]() | ||||
|
||||
| ||||
|
||||
| ||||
|
I would email paul@parabolicsuspension.com and ask him directly he should be able to assist if you want to group ship.
![]() | ||||
|
||||
| ||||
|
Paul emailed yesterday and stated that the springs should be arriving tomorrow morning in Arnheim.
| ||||
|
||||
|
||||
| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |









Autor







Gespeichert
