kleiner tgb 11 links
| C303 HOME Deutsch | C303 HOME English |
kleiner tgb 11 rechts

News: Board-Migration in progress, look at adminitrators-opinion

Willkommen, Gast. Bitte Login oder Registrieren.

  21.November 2026 13:52:38

Seiten: [1] Antwort Überwachen Senden Sie dieses Thema Drucken
   Autor  
All-Posts
 Thema: Stuck in front-wheel-drive (& wieder etwas bezueglich Bremsen)  (Gelesen 4093 mal)
WJM

**

Offline

Einträge: 4931





Profil anzeigen WWW eMail
Stuck in front-wheel-drive (& wieder etwas bezueglich Bremsen)
« am: 29.April 2006 02:0:37 »
Antwort mit Zitat nach oben
Schon auf die Englische Mailingliste gepostet, leider viel zu lang zum Uebersetzen, aber weil es auch eine Warnung fuer andere ist hoffe ich dass das Wichtigste schon herueber kommt:

xxxxxxxxx
To: volvo303@yahoogroups.com
From: "Willem-Jan Markerink" <w.j.markerink@a1.nl>
Date: Thu, 27 Apr 2006 23:06:34 +0200
Subject: [Volvo303] T-case shifting vs stuck in 4wd/6wd, help!
Reply-To: Volvo303@yahoogroups.com

Several observations, ponderings & questions regarding the T-case
front-axle engagement, plus the steering forces of a 6x6 Volvo.
(plus a bunch more in the context of braking)


1)  after an engine overhaul (and removing/remounting of the
gearbox/T-case), and having driven 1200km[1] fresh kilometres (mostly
back & forth to the import-office, plus recently for a new stainless
steel exhaust[2], I started to wonder if it was really just the rear
axles that made steering so difficult, fighting eachother sideways,
in tight corners.
First I had an interesting discussion with the exhaust-guy....he said
that *because* the rear axles move sidewards in a corner, away from
eachother, their individual turning circle is different too, just
like between any front and rear axle....hence even between the rear
axles themselves, there is extra resistance because of drive-train
binding.
With that new argument in mind, and a *lot* of arm-twisting park
manoeuvres, to get the vehicle into their shop, plus observing not
just an oil-sweating T-case, but also a rear-most axle that seemed to
leak (foamy?) oil through the vent-tube(?), I started to wonder if it
was really those rear axles that caused so much resistance, and
whether not my front-wheel-drive was the actual cause, being stuck
for whatever reason (vacuum actuator, vacuum switch, or the brake-
actuator (electrics), resulting in a hard life for both T-case and
diff's).
So, just to be sure, and not convinced that switching my front-axle-
drive button on the dashboard really added any resistance (nor could
I hear it shifting (like I still can with the diff locks), I jacked
up one front wheel, with engine running....and low and behold, it
wouldn't turn freely....so it is indeed stuck in 6wd, T-case
engaged....bad omen!
Time-analysis: I have at least *some* doubts that it has been stuck
since the engine-overhaul....because at the import test-procedure,
some weeks later, I had to perform 2 brake tests, both main/foot-
brake and parking/hand-brake, and I do recall that I managed to lock
up both my rear axles with the parking-brake (quite impressive
actually, never managed that with any other 4x4, at least not on a
dry road)....much different than when testing the main-brakes (no
lock up at all, much more significant 'nose-dive'.
Further: I am pretty sure the vacuum-actuator was still working
properly when I bought the vehicle in Sweden....by demonstrating the
brake-trigger, resulting in an audible hiss.



[1] the shop that did the engine-overhaul recommends a first oil
change at 1000km for any engine, which already made me wonder if
1000km with a normal vehicle wouldn't be equal to 500km in a much
lower geared Volvo....
That said, I recently noticed that the factory service manual also
contains recommendations for this first oil change, for either a new
or overhauled engine....far higher even, 2500 miles....quite a
difference.
(makes me wonder if any other vehicle manufacturer ever put
recommendations for an overhauled engine in their manual?....wasn't a
military manual either I believe....)

[2] there is only one good shop in Holland for this kind of custom
jobs....very nice & compact design/routing, leaves the entire right-
hand-side belly free for a fuel tank....:))



Which leads to several questions:

- first and foremost:
Since this could happen again in various scenario's/failure-
permutations (vacuum-actuator, vacuum-switch, brake-
actuator/trigger): what is the quick and dirty method to disengate
the front-axle drive?
The unit requires vacuum to open up (engine-off means front-axle
drive engaged!), so as long as the vacuum actuator still works, one
could at least bypass the vacuum-switches (and/or the brake-
trigger)....are there any small electric 12v vacuum pumps for this
purpose? (to avoid having to splice back into the factory vacuum
system/hoses)
No, removing the front drive-shaft wasn't what I had in mind,
actually....too dirty, not quick....8-))
(btw, I removed the small floor panel behind the large engine-cover,
to see what is accessible from above and not....detail learned: with
the cover off, the edges of this opening are not as strong, so watch
out when you step on it, like you would normally do when walking
through the vehicle....it bends quite easily)

- second, more problem-analytical:
What is the most likely cause for this actuator being stuck?
Remember that the diff locks require vacuum to engage, and I recall
from older discussions that some people had problems with the diff
locks not engaging, changing them to cable-actuation....
Therefor, the exact same thing/problem that prevents the diff-locks
when engaging, might fail in the T-case when dis-engaging?
Also/however: in contrast to the diff-locks, the T-case vacuum-
actuator is used much more frequently....like every time you start
the engine (from engaged to disengaged), and every time you brake
hard.....so this difference in actual use could lead to a possibly
very different cause in typical failure?
(diff-locks failing because of hard seals/vacuum-bulb, T-case failing
because of worn seals?)
But somehow I don't think it is not the T-case actuator itself that
is broken/stuck, otherwise my front-axle-drive button on the
dashboard should still result in an audible 'hiss' of escaping air,
regardless whether the vacuum-actuator moves or not, correct?
Or is the hiss gone when it is stuck?
(oh no, wait, it is an electrical button, so the hiss, if at all,
probably takes place elsewhere in the vehicle, at the electro-air
switch/valve?
Next analytical option: what is needed to bypass the brake-circuit,
to rule it out as a possible cause?

Oh, and another problem-analyzing approach: since the front-wheel-
drive engagement is also electro-pneumatically operated when you
shift the T-case into low-range: *where* is this low/high range
detected?....at the T-case itself (without any interference of either
shift-linkage nor low/neutral/high indicator on the dashboard, next
to the diff lock controls (this indicator is only present on civil
models because of the requirement for PTO-neutral!)), or is this low-
range detected near the shifter and/or in the low/neutral/high
indicator on the dashboard?


- third, category damage-control:
How much has either T-case or rear-most diff suffered, given the
symptoms of sweating & 'foaming'?
It's not much oil, have seen worse on other vehicles, but always at
the seals, not spilling out on top....
Has anyone experienced such a failure before, T-case locking up, not
being noticed for quite some time?
Perhaps less likely on a 4x4, because on a 4x4 the symptoms are not
being overshadowed by the rear-axle twisting like a 6x6?



2) since this also means that my front axle is already engaged,
instead of being shifted into 6wd under hard braking, I now wonder
whether my brake-observations are also affected by this, and/or
whether any brake-problem could have triggered this T-case
locking....

- I do have sufficient braking power, yet strangely enough I get much
better braking power if I (re)press the pedal a second
time....remember, all this while my front axle is already engaged.

- at standstill, engine-off, the pedal does sink a bit under
continuous pressure....master cylinder in need of an
rebuild/overhaul, correct?

(btw, the manual mentions that *if* one of the two brake boosters
fails, it requires twice the pedal force to obtain 80% of the
original brake performance (and if all boosters fail, you need 4
times the effort, for half the effect, IIRC)
(oops, while rereading this section (page 32 of the online document
'VolvoOperatorsManual' (=section/file #2), it says 'brake circuit
failure', not 'brake booster failure' (and 50% effect at normal pedal
pressure)....while the 4-times effort applies not only to both
boosters failing, but also when 1 booster fails (strange!)....and
resulting in the same braking effect (perhaps the '2x effort = 80%
effect' of one circuit failing can also be read as 2.5x effort = 100%
effect?)


Overall lesson learned:
If your steering is hard work, jack up one front wheel, and test the
T-case functioning!


PS: these observations also somewhat answer a question from a list-
message many moons ago, about whether the front-wheel-drive button
light....

a) ....shows the true engagement status (apparently not, no light
with button out, while I do have the front axle engaged)

or

b) ....only confirms actual front-wheel-drive when the button is in
(so that it can warn you if front-wheel-drive is physically not
engaged, while you did press the button)

or

c) ....only confirms the status/position of the button....8-))

I still have hope on 'b', but I suspect 'c'....;((

(for the diff-locks we already concluded that their lights only
indicate the selector setting, not the real status of the locks
(can't be, since there is no electric sensor on the axles!))
(but since the T-case does have some electric sensors, it could still
do better in this context)







--               
Bye,

Willem-Jan Markerink

      The desire to understand
is sometimes far less intelligent than
    the inability to understand

<w.j.markerink@a1.nl>
[note: 'a-one' & 'en-el'!]


*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A*


Those who wander are not necessarily lost
J.R.R. Tolkien
...and not all who launder are washed/WJ....;))


<w.j.markerink@A1.NL>
« Letzte Änderung: 29.April 2006 13:48:31 von WJM » Moderator benachrichtigen   Gespeichert
Seiten: [1] Antwort Überwachen Senden Sie dieses Thema Drucken
Powered by MySQL Michaels-Volvo-Offroader-Forum | © 2001-2004 YaBB SE
forked to php5 & mysql-5 & XHTML in 2009 by mibu
lifted to php8.2 in 2024 by mibu
Powered by PHP

| Datenschutz | Impressum |

Seite erstellt in 0.0703 Sekunden. 19 Queries.