kleiner tgb 11 links
| C303 HOME Deutsch | C303 HOME English |
kleiner tgb 11 rechts

News: Forums-Migration in Planung, siehe Das-Letzte-Wort

Willkommen, Gast. Bitte Login oder Registrieren.

  21.November 2026 18:2:49

Seiten: [1] Antwort Überwachen Senden Sie dieses Thema Drucken
   Autor  
All-Posts
 Thema: oil leak  (Gelesen 5941 mal)
Hägar

*

Offline

Einträge: 24



Ich liebe dieses Forum!

Profil anzeigen eMail
oil leak
« am: 3.Juni 2007 20:34:47 »
Antwort mit Zitat nach oben
Hello everyone,
there is oil leaking out of my front portal box.
The leak is probably comming through the drive shaft bearing, as the oil drips out by the rubber dust cover on to the steering knuckle support.
Would that be the CR 23451 seal? (upper portal/axletube oil seal) and should I order other parts too (new dust cover etc.) or can I use the old one?
I like to be sure I have all the parts before I start because it is my daily driver.
thanks in advance
greetings.. Joeri
Moderator benachrichtigen   Gespeichert
Hägar

*

Offline

Einträge: 24



Ich liebe dieses Forum!

Profil anzeigen eMail
Re:oil leak
« am: 4.Juni 2007 15:37:53 »
Antwort mit Zitat nach oben
Zitat von: Yankee am 4.Juni 2007 06:25:52
I think he means the Cover (Nr 20 / Page 297).

that is indeed where the oil is dripping from.
Moderator benachrichtigen   Gespeichert
Hägar

*

Offline

Einträge: 24



Ich liebe dieses Forum!

Profil anzeigen eMail
Re:oil leak
« am: 4.Juni 2007 19:21:9 »
Antwort mit Zitat nach oben
Zitat von: michael am 4.Juni 2007 16:44:39
Ok, it is dripping from the rubber cover, as I read on the edge towards the wheel.

Exactly, only I am not losing oil from the dif, only from the portal box. But I don't think this oil can get so high, which is probably the reason why there is no seal on this side.
grtz Joeri
Moderator benachrichtigen   Gespeichert
Hägar

*

Offline

Einträge: 24



Ich liebe dieses Forum!

Profil anzeigen eMail
Re:oil leak
« am: 4.Juni 2007 21:21:43 »
Antwort mit Zitat nach oben
[quote author=michael
Please: which part is this CR 23451 seal? (upper portal/axletube oil seal). I can't identify it on the part list.

Zitat:

I got it from Richards site, along with other usefull info.
http://www.volvoc303.co.uk/mechanical_info.htm
Your theory sounds reasonable, so I will try to order the dust cover.
Moderator benachrichtigen   Gespeichert
Hägar

*

Offline

Einträge: 24



Ich liebe dieses Forum!

Profil anzeigen eMail
Re:oil leak
« am: 6.Juni 2007 08:24:11 »
Antwort mit Zitat nach oben
Pictures say more than a thousand words, now I am almost sure this is indeed the part to be replaced.
Thanks guys for the information and help smiley
greetz.. Joeri
Moderator benachrichtigen   Gespeichert
Hägar

*

Offline

Einträge: 24



Ich liebe dieses Forum!

Profil anzeigen eMail
Re:oil leak
« am: 6.Juni 2007 15:55:51 »
Antwort mit Zitat nach oben
Zitat von: Christoph am 6.Juni 2007 15:23:36
Oh mein Gott  shocked das is ja ne Operation am offenem Herzen, habe mir die Gummiteile bestellt, weil meine ziemlich porös aussehen. Muss man um die zu wechseln das ganze Radgetriebe inclusive Bremse demontieren.
Hilfe........na da bin ich mal gespannt ob/wie ich das wieder zusammenkriege
Die übriggebliebenen Teile kann ich ja dann hier im Forum anbieten....
christoph.

this might help.
http://koesters.dk/volvomanuals/section4transmission13.pdf
grtz Joeri
Moderator benachrichtigen   Gespeichert
Seiten: [1] Antwort Überwachen Senden Sie dieses Thema Drucken
Powered by MySQL Michaels-Volvo-Offroader-Forum | © 2001-2004 YaBB SE
forked to php5 & mysql-5 & XHTML in 2009 by mibu
lifted to php8.2 in 2024 by mibu
Powered by PHP

| Datenschutz | Impressum |

Seite erstellt in 0.0738 Sekunden. 19 Queries.