|
3rd Diff drive Pto bearing Failure on TGB13 . Has anyone looked at someway of getting more lubrication to the main shaft bearings? After analysing noises from axles and diffs using chasiss ear to try to find loud whine from rear, I pinpointed whine to PTO drive. Experienced members(thanks Claas) have pointed me to Idler gear play which causes the gears to not mesh correctly as the source of the whine. Well I finally had time to remove Pto for examination to find main shaft bearings worn and flats spots which points to lack of lubrication. The idler gear had practically no play and movement less than 0.08mm. Because the pto drive sits over diff it appears that lubrication is supposed to travel via rotating gears to the top and provide lubrication to the 3 shaft bearings but it may not be enough. This is at least the second PTO that the vehicle has as it is not painted and has been fitted to replace original at some point. Has anyone experienced Pto failure and used sealed bearings on main shaft or found some way to deflect more oil to bearings?
|