| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |
|
||||
Autor
|
Thema: Rooftop strenght (Gelesen 1508 mal) | |||
| ||||
|
Good morning everyone, I'm about to buy my first c303 and I wanted to know if it was possible to install directly a rooftop tent on the rooftop, without using a roof rack.
I have a ARB Esperance RTT and I'd like to bolt it directly to the roof. Is it possible? Is the roof strong enough to support the weight of 2 or 3 adults in the tent? I've seen this https://c303.de/c303-en/p-roof4.htm but I don't know if some works were done before to reinforce the roof or if in the long run nothing got bent or damaged. Thank you very much! | ||||
|
||||
| ||||
Yes, this is also how most civil firetrucks had their steel/galvanised roof-rack mounted, albeit with flat feet every 50cm or so (2x 10-15cm feet surface, all prewelded solid, one rigid roofrack (wooden floor)). Inside/underroof an equal sized counterpart, of course. Note that the *rear* rooftop is aluminium, so keep electrolytic rust potential in mind on contact surfaces with steel, a la Land Rover. Front rooftop is steel. (NB: firetrucks used only rear rooftop, never front) Each foot is mounted by two bolts through the roof. A good, stronger & more flexible longterm alternative would be to glue cargo-rails to the rooftop or -sides (bolts are hardly needed, providing you use the strongest automotive/bodypanel glue possible). (also works on vertical side-panels, for mounting sandplates & jerrycan's, or on the rear for roof-access/steps/ladder) <ADDENDUM> For more glue-strength, bolt/weld the cargorail(-segments!) itself to a wider strip of steel/alloy. (though wide-foot cargorails also exists, to a limit) | ||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||
| ||||
|
Thank you!
| ||||
|
||||
| ||||
|
<ADDENDUM>
For more glue-strength, bolt/weld the cargorail(-segments!) itself to a wider strip of steel/alloy. (though wide-foot cargorails also exists, to a limit) | ||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||
| ||||
|
As you can see here: https://c303.de/c303-en/p-roof3.htm I have put a flat iron unterneath the mounting points. The alloy block on the top has a counterpart of steel unterneath, fitted together with two small screws of M6 On the inside there is a M8 nut welded to the flat iron. The roof ist stable enough to carry the tent of 68 kg, and two people, together about 230 kg, even without the roll bar on the inside. If you calculate the circumfence of the flat iron from the 8 support points the length is greater than the support surface of the "feet" of the roof rack, which ends on the rain gutter. That means the force on every mm material is much more less than for the standard mounts of removable roof racks. I know from removing a part of the rain gutter to get space for the doors, when I turned the roof front to backside, that this rain gutter is not very solid, I could break and remove it easily. I preferred to fix my tent with 8 screews M8 instead of 4 and to keep it closer to the roof to avoid leverage. It worked well for me, nothing came loose and no cracks in the roof around the mouning points, everything was stable. good luck michael | ||||
"oh, for sure, you can do it with a normal streetcar...."
|
||||
| ||||
|
Some more anecdotal data-points:
- When buying one of my C306 firetrucks, from active duty, the fire-chief handed me all their old documentation, and with a wide grin he specifically pointed me to the initial actual weight-rating, from the 80's, vehicle in full 'combat' dress. 6400kg....:)) Mind you: official Tollarp documentation officially listed the C306 as 5400kg; while most had a bit less in reality, 5200-5350kg. Still wondering how they managed 6400kg. Basic empty vehicle is about 3300-3400kg (depending on PTO/hydraulics) Add 900L water, 500kg metal gear, 500kg hoses, 50kg ladder, 50kg winch, 50kg winch-hoist-triangle, 50kg brancard, 5x 100kg crew, and one is still 500kg short of that 6400kg....so *some*of that can probably be attributed to some extra roof-load....:)) - Many years ago, I did an advertorial/marketing project for SevenUp/Splash drink, handing out 1L Tetra-Packs on city-markets & camp-sites. From another refridgerator-truck, each day we would load 1-2 ton of those packs into the Volvo. Because it also needed to transport the marketing-crew on those camp-sites, we would often load half of those packs on the roof (the rest in the rear/top cargo compartment (2-stroke engine-driven waterpump on one side, additional 300L fuel tank in the rear)). Though while only driving at lower speeds, neither roofrack nor roof ever gave a sweat or creak. I estimated about 50-75kg at each of it's support-feet (4m long, feet every 50cm, 16 total). Also first time the suspension got nicely soft in the rear (many speed bumps on camp-sites; 4-(over-)load setup, identical to TGB20/5700kg), and in corners it went notably off-camber, like a ship on high seas....:)) NB1: this was also the only time I ever saw the 4th overload leaf being active, on this particular C306. NB2: the other, 6400kg-once-rated C306, however, had it's 4th leaf active _all the time_, *empty*. (so its initial 6400kg combat weight, for all it's 30 years (1st & only owner, not common btw), was rather convincing/plausible) | ||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||
| ||||
|
Thank you everyone, a lot of informations!!
| ||||
|
||||
|
||||
| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |









Autor






Gespeichert



