| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |
|
||||
Autor
|
Thema: Mercedes OM605 OM606 conversion parts (Gelesen 473 mal) | |||
| ||||
|
I am converting my C303 to diesel with a Mercedes OM605. I am keeping a 24V system and thought it might be useful to list the parts I have found to be compatible. I expect these will be useful for an OM603 or OM606 conversion but please do your research. I will add to this list as I make progress.
Starter motor FITTED AS-PL S0-266 (24V) https://as-pl.com/en/p/S0266 This is a direct fit, and is used on the 24V G-Wagen Alternator NOT YET FITTED AS-PL A0511 (24v) https://as-pl.com/en/p/A0511 This is a direct fit, and is used on the 24V G-Wagen Glow Plugs FITTED GS906 (24V) http://www.aladin-power.net/product_info.php/info/p472_GS906.html Oil pump (rear sump) FITTED Mercedes A61218110201 Sump (rear sump) FITTED Mercedes A6470140102 Transmission adapter NOT YET FITTED SMT Kit https://smt.nu/volvo-c303-mercedes-benz-300ddt-6-cyl.php Flywheel NOT YET FITTED SpeedingParts P-FW-02 https://www.speedingparts.co.uk/p/drivetrain/clutch-flywheel/flywheel/mercedes-flywheel/mb-om603-om606-m104-m113-flywheel-240mm-sachs-765.html To replace the automatic transmission flywheel. This flywheel is designed for the Sachs Performance 240mm clutch cover 883082 999765. To fit the clutch plate below (Clutchfix) this needs machining to provide clearance for the centre of the clutch plate (springs, etc). A 5mm step was machined giving a 135mm wide centre for the central clutch plate assembly to sit in. Clutch NOT YET FITTED Sachs Performance 240mm clutch cover 883082 999765 https://www.sachsperformance.com/en/clutch-kit/performance-clutch-sachs/clutch-cover-999765 This is rated for 590Nm when used with an organic plate. The engine is likely to produce 400–450 Nm so this is sufficient. Clutch Plate NOT YET FITTED Made by Clutchfix for a very good price, no more than an off the shelf performance plate. http://clutch-fix.co.uk A bespoke 240mm sprung organic plate with the required 1-1/8” x 10 spline rated to 500Nm. Starter ring gear NOT YET FITTED Mercedes 1020320606 (note this requires the flex plate to be bolted on securely) - not convinced this will fit! Mechanical Injector pump NOT YET FITTED PES SM 55C 320 RS 201 (OM603) upgraded to 6mm elements (250bhp) Gear box NOT YET FITTED TGB20 5 speed - so far unmodified Turbo NOT YET FITTED Holset HE221W 7cm Combined with 6mm injector pump achieves @250bhp target | ||||
|
||||
| ||||
|
Hey Paul,
thanks a lot for the list. Hopefully there will be some pictures too, of the conversion :-) Grüße Uli | ||||
|
||||
| ||||
|
Hi Paul,
absolutely nice | ||||
|
||||
| ||||
|
Thank you for the list.
I have done the OM606/605/603/602 conversions to multiple Gwagens over the years. Most of them were 24V. Certain part #'s on your list look real familiar. I have found converting everything to 12V is far easier and cost effective over time. Parts are more readily available here in the states compared to 24V stuff. I'm about to start on a new project for a client and I will be converting his C303 to 12V along with a long list of upgrades. I will post up as I go along. Thank you again for your 24V list. | ||||
|
||||
|
||||
| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |









Autor






Gespeichert