| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |
|
||||
Autor
|
Thema: Stuck in front-wheel-drive (& wieder etwas bezueglich Bremsen) (Gelesen 4091 mal) | |||
| ||||
|
Schon auf die Englische Mailingliste gepostet, leider viel zu lang zum Uebersetzen, aber weil es auch eine Warnung fuer andere ist hoffe ich dass das Wichtigste schon herueber kommt:
xxxxxxxxx To: volvo303@yahoogroups.com From: "Willem-Jan Markerink" <w.j.markerink@a1.nl> Date: Thu, 27 Apr 2006 23:06:34 +0200 Subject: [Volvo303] T-case shifting vs stuck in 4wd/6wd, help! Reply-To: Volvo303@yahoogroups.com Several observations, ponderings & questions regarding the T-case front-axle engagement, plus the steering forces of a 6x6 Volvo. (plus a bunch more in the context of braking) 1) after an engine overhaul (and removing/remounting of the gearbox/T-case), and having driven 1200km[1] fresh kilometres (mostly back & forth to the import-office, plus recently for a new stainless steel exhaust[2], I started to wonder if it was really just the rear axles that made steering so difficult, fighting eachother sideways, in tight corners. First I had an interesting discussion with the exhaust-guy....he said that *because* the rear axles move sidewards in a corner, away from eachother, their individual turning circle is different too, just like between any front and rear axle....hence even between the rear axles themselves, there is extra resistance because of drive-train binding. With that new argument in mind, and a *lot* of arm-twisting park manoeuvres, to get the vehicle into their shop, plus observing not just an oil-sweating T-case, but also a rear-most axle that seemed to leak (foamy?) oil through the vent-tube(?), I started to wonder if it was really those rear axles that caused so much resistance, and whether not my front-wheel-drive was the actual cause, being stuck for whatever reason (vacuum actuator, vacuum switch, or the brake- actuator (electrics), resulting in a hard life for both T-case and diff's). So, just to be sure, and not convinced that switching my front-axle- drive button on the dashboard really added any resistance (nor could I hear it shifting (like I still can with the diff locks), I jacked up one front wheel, with engine running....and low and behold, it wouldn't turn freely....so it is indeed stuck in 6wd, T-case engaged....bad omen! Time-analysis: I have at least *some* doubts that it has been stuck since the engine-overhaul....because at the import test-procedure, some weeks later, I had to perform 2 brake tests, both main/foot- brake and parking/hand-brake, and I do recall that I managed to lock up both my rear axles with the parking-brake (quite impressive actually, never managed that with any other 4x4, at least not on a dry road)....much different than when testing the main-brakes (no lock up at all, much more significant 'nose-dive'. Further: I am pretty sure the vacuum-actuator was still working properly when I bought the vehicle in Sweden....by demonstrating the brake-trigger, resulting in an audible hiss. [1] the shop that did the engine-overhaul recommends a first oil change at 1000km for any engine, which already made me wonder if 1000km with a normal vehicle wouldn't be equal to 500km in a much lower geared Volvo.... That said, I recently noticed that the factory service manual also contains recommendations for this first oil change, for either a new or overhauled engine....far higher even, 2500 miles....quite a difference. (makes me wonder if any other vehicle manufacturer ever put recommendations for an overhauled engine in their manual?....wasn't a military manual either I believe....) [2] there is only one good shop in Holland for this kind of custom jobs....very nice & compact design/routing, leaves the entire right- hand-side belly free for a fuel tank....:)) Which leads to several questions: - first and foremost: Since this could happen again in various scenario's/failure- permutations (vacuum-actuator, vacuum-switch, brake- actuator/trigger): what is the quick and dirty method to disengate the front-axle drive? The unit requires vacuum to open up (engine-off means front-axle drive engaged!), so as long as the vacuum actuator still works, one could at least bypass the vacuum-switches (and/or the brake- trigger)....are there any small electric 12v vacuum pumps for this purpose? (to avoid having to splice back into the factory vacuum system/hoses) No, removing the front drive-shaft wasn't what I had in mind, actually....too dirty, not quick....8-)) (btw, I removed the small floor panel behind the large engine-cover, to see what is accessible from above and not....detail learned: with the cover off, the edges of this opening are not as strong, so watch out when you step on it, like you would normally do when walking through the vehicle....it bends quite easily) - second, more problem-analytical: What is the most likely cause for this actuator being stuck? Remember that the diff locks require vacuum to engage, and I recall from older discussions that some people had problems with the diff locks not engaging, changing them to cable-actuation.... Therefor, the exact same thing/problem that prevents the diff-locks when engaging, might fail in the T-case when dis-engaging? Also/however: in contrast to the diff-locks, the T-case vacuum- actuator is used much more frequently....like every time you start the engine (from engaged to disengaged), and every time you brake hard.....so this difference in actual use could lead to a possibly very different cause in typical failure? (diff-locks failing because of hard seals/vacuum-bulb, T-case failing because of worn seals?) But somehow I don't think it is not the T-case actuator itself that is broken/stuck, otherwise my front-axle-drive button on the dashboard should still result in an audible 'hiss' of escaping air, regardless whether the vacuum-actuator moves or not, correct? Or is the hiss gone when it is stuck? (oh no, wait, it is an electrical button, so the hiss, if at all, probably takes place elsewhere in the vehicle, at the electro-air switch/valve? Next analytical option: what is needed to bypass the brake-circuit, to rule it out as a possible cause? Oh, and another problem-analyzing approach: since the front-wheel- drive engagement is also electro-pneumatically operated when you shift the T-case into low-range: *where* is this low/high range detected?....at the T-case itself (without any interference of either shift-linkage nor low/neutral/high indicator on the dashboard, next to the diff lock controls (this indicator is only present on civil models because of the requirement for PTO-neutral!)), or is this low- range detected near the shifter and/or in the low/neutral/high indicator on the dashboard? - third, category damage-control: How much has either T-case or rear-most diff suffered, given the symptoms of sweating & 'foaming'? It's not much oil, have seen worse on other vehicles, but always at the seals, not spilling out on top.... Has anyone experienced such a failure before, T-case locking up, not being noticed for quite some time? Perhaps less likely on a 4x4, because on a 4x4 the symptoms are not being overshadowed by the rear-axle twisting like a 6x6? 2) since this also means that my front axle is already engaged, instead of being shifted into 6wd under hard braking, I now wonder whether my brake-observations are also affected by this, and/or whether any brake-problem could have triggered this T-case locking.... - I do have sufficient braking power, yet strangely enough I get much better braking power if I (re)press the pedal a second time....remember, all this while my front axle is already engaged. - at standstill, engine-off, the pedal does sink a bit under continuous pressure....master cylinder in need of an rebuild/overhaul, correct? (btw, the manual mentions that *if* one of the two brake boosters fails, it requires twice the pedal force to obtain 80% of the original brake performance (and if all boosters fail, you need 4 times the effort, for half the effect, IIRC) (oops, while rereading this section (page 32 of the online document 'VolvoOperatorsManual' (=section/file #2), it says 'brake circuit failure', not 'brake booster failure' (and 50% effect at normal pedal pressure)....while the 4-times effort applies not only to both boosters failing, but also when 1 booster fails (strange!)....and resulting in the same braking effect (perhaps the '2x effort = 80% effect' of one circuit failing can also be read as 2.5x effort = 100% effect?) Overall lesson learned: If your steering is hard work, jack up one front wheel, and test the T-case functioning! PS: these observations also somewhat answer a question from a list- message many moons ago, about whether the front-wheel-drive button light.... a) ....shows the true engagement status (apparently not, no light with button out, while I do have the front axle engaged) or b) ....only confirms actual front-wheel-drive when the button is in (so that it can warn you if front-wheel-drive is physically not engaged, while you did press the button) or c) ....only confirms the status/position of the button....8-)) I still have hope on 'b', but I suspect 'c'....;(( (for the diff-locks we already concluded that their lights only indicate the selector setting, not the real status of the locks (can't be, since there is no electric sensor on the axles!)) (but since the T-case does have some electric sensors, it could still do better in this context) -- Bye, Willem-Jan Markerink The desire to understand is sometimes far less intelligent than the inability to understand <w.j.markerink@a1.nl> [note: 'a-one' & 'en-el'!] | ||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||
| ||||
My ideas are not so quick: if it is as you say that "vacuum-ON" means "locks are open" - at first test if the vacuum system is working at all if it does work check the middle vacuum switch - put the vacuum hose from the back axle to the middle switch if it works, than build a workaround - take a t-connector and a fresh piece of hose and switch the middle together with the rear axle now you can look without stress why the front axle button and hose are disfunctional
I would not think so, because: if it is only a little movement down on the pedal before it stops, that may come from the inactive brake boosters. If it is continiously moving down you are right. But that effect should be notable with the engine running, too. regards, michael | ||||
"oh, for sure, you can do it with a normal streetcar...."
|
||||
|
||||
| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |









Autor








Gespeichert

