| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |
|
||||
Autor
|
Thema: Keys (Gelesen 5713 mal) | |||
| ||||
|
How do I go about acquiring additional door keys, I have only one and fear losing it! Or even an ignition key for that matter, it is always usful to have additional ones for safety and convinience.
I tried a local Lock Smith who also deals with all types of Car Locks but he could not help me with this, he suggested that I go to a Volvo Dealer. He said that they could provide a blank and that in the event that they could not cut it he could but he needs a blank as non of his keys looks a likely candidate. He says it is a strange key and that mine is not the original and looks as though it may be a Chinese blank. Surely I cannot just go to a Volvo dealer and ask for a Key as they will just laugh Even ifI tell them what the Vehicle is they will laugh even more . It may be a stupid question but how do I ask the Volvo dealer can I suggest a part number, or a chassis number?? | ||||
|
Grüße Anthony GB
|
||||
| ||||
|
It was the first thing I did when I was back in Colone from Sweden:
I went to a key / shoe-repair-shop called Mister Minit and he made two copies from the door key and from the ignition key as well in less than one hour in between his other work. The igintion key is a standard Bosch-Key Type E xx and something, the Minit-Number for the blank was 425. The door key is from DLP which is LaPorte, Wuppertal, Number 1000 and something, the blank got an imprint of "LAP 1". The locksmith gave me the hint not to use the originals any more to keep them for later copies. hope that helps Michael | ||||
"oh, for sure, you can do it with a normal streetcar...."
|
||||
| ||||
|
Thank you Michael, that is helpful. I take it that going to Volvo might be a waste of time?
| ||||
|
Grüße Anthony GB
|
||||
| ||||
I think so. Every good assorted key cutting shop should have the apropriate blanks - I hope... A Volvo dealer only would try to order a new key - not a good idea. michael | ||||
"oh, for sure, you can do it with a normal streetcar...."
|
||||
| ||||
|
Thank you Michael for the help & the links via PM. I shall try a couple more times here but it is very countryfied and facilities are very poor. I shall most probably have better success when I visit the Wirral up near Liverpool next week end. Their are much better facilities there than here and I know of an excellent Lock Smith, who specializes in Auto Keys and his shop is quite large with an impressive collection.
| ||||
|
Grüße Anthony GB
|
||||
| ||||
|
Maybe they don't find the key as an car key. It's more like a simple letterbox lock. I tried three key shops to find the right blanks.
| ||||
|
||||
| ||||
|
hexoplast75,
you are most probably correct about the type of key. in that it is not normally associated with cars. Michael has given me some excellent information about Keys, perhaps he might share it here. ![]() | ||||
|
Grüße Anthony GB
|
||||
| ||||
A *good/modern* shop can cut the keys straight from the computer-database, given the lock-code on the key (there is a part/key code on it, to select the correct blank, but also an 'individual' code, which, on the door-locks, matches the code on the lock itself (inside, hidden behind the door panel)). But you *do* need to be careful with the old keys, since only they contain the lock-code; the new keys don't have it, so you can't do that trick again, if you loose that key completely, unless you write the numbers down carefully, or dismantle the door. Same for old Land Cruisers btw.... And given that this is certainly not a Dutch key, nor key-database, this concept must be available in other EU-countries too, possibly even worldwide. Btw, more data here: http://www.a1.nl/phomepag/markerink/volvo_key-blanks.txt http://www.a1.nl/phomepag/markerink/volvo_doorlock.txt | ||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||
| ||||
|
Thank you also WMJ,
This is a fascinating subject, I did not imagine that their would be such experts. I had hardly thought about keys before, locks yes. On my LR101FC I used Yale household dead locks all keyed alike to help prevent easy entry. Mind you the 101 does not have any locks at all. I presume that they consider the GB squadie to be an honest Jack. ![]() | ||||
|
Grüße Anthony GB
|
||||
| ||||
|
Puzzling together some infos from the yahoo group and own research I got these results
Depending of being in Europe or overseas you may get different sources and results at the local suppliers. Pictures may be from the tip of the key or mirrored from the hole - whatch for descriptions... Depending on the shop prices are very different. I payed for 2 Ignition keys and 2 door keys (blanks and work) 24,98 Euro all together in 2005. Ignition Key: Interesting page with pictures and shapes of keys http://www.nwkeys.co.uk/Portal.aspx?page=29&cat=87&ptf=Application%7c%3d%7cBosch The Bosch series is form E1 to E100 - boat key http://www.morlands.demon.co.uk/keyidxB.htm#bosch The key blank may be silca NE9 (better BH4) or ilco NE10 http://www.nwkeys.co.uk/Portal.aspx?page=29&mfr=67&code=NE9 http://www.nwkeys.co.uk/Portal.aspx?page=29&mfr=67&code=BH4 http://www.imperialinc.com/items.asp?item=0376450 http://www.aufsperrtechnik.de/shop/article_BH4 http://www.mrlock.com/eshop/locks/NE10.html http://key-men.com/shopping/show_key.php?catnum=VO62 http://key-men.com/shopping/show_key.php?catnum=NE10 The last one shows up correctly # Code Series: E1-100, HG/M/N/U/1-50 # Equivalent part numbers: Ilco #: NE10 Dominion #: NE10 Silca #: BH4 Additional Equivalents from ilco-cross-refference: Curtis #: VL11 Orion #: BO10 For me the silca NE9 seems to be misleading: very similar, but not the same, see the two links at Key-men.com above for differences. May be the silca NE9 fits in a very worn out lock... An other hint that the silca NE9 is wrong: in this cross-reference:ttp://www.malteblock.de/html/keybank/keybank.htm the Silca NE9 is Mister Minit #293, but my working key is Mister Minit #425. Door Key: Interesting page with pictures and shapes of keys http://www.nwkeys.co.uk/Portal.aspx?page=29&pt=8&ptf=Application%7c%3d%7cDelaporte The range of DLP from 1001 to 1052 seems to be the right one for the doors! http://www.morlands.demon.co.uk/keyidxD.htm#dlp The door key blank is silca LAP1 (I have it) or may be Ilco BH3/Taylor P72K The following link mentiones laporte directly: http://www.nwkeys.co.uk/Portal.aspx?page=43&prod=2560 http://www.aufsperrtechnik.de/shop/article_LAP1 http://key-men.com/shopping/show_key.php?catnum=BH3 # Code Series: B/77001-77025 # Equivalent part numbers: Ilco #: BH3 discontinued ! in the ilco-list Better refer to the additional Equivalents from ilco-cross-refference for silca LAP1: ILCO #: 63L Orion #: LP10 Resulting from this comes: Taylor #: S61W Dominion #: 63L Now you can go to your locksmith and present a rich list of equivalent blanks. Michael | ||||
"oh, for sure, you can do it with a normal streetcar...."
|
||||
| ||||
Idea: If you got duplicates, let the original code be hammered in to keep it. I did not do it, but it sounds like an good idea... ![]() michael | ||||
"oh, for sure, you can do it with a normal streetcar...."
|
||||
| ||||
|
In hindsight I should have noted that my Silca NE9 reference possibly only applies to *civil* models, with the ignition lock on the steering collumn.
(I had that changed to a dash-lock{*}, but that was a generic model (Silca ALP9, in case someone else might need a first or last attempt, in a similar scenario/configuration). {*} because of the power steering (it can be kept, even the steering lock, but requires a lot of extra labor/machining/expenses (and if you stay within the Danfoss system, you probably have an easier selection of smaller diameter steering wheels (and add a steering knob for even more convenience....:)) | ||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||
| ||||
|
moin und danke an alle für die vielen informationen,
war vorhin bei mr. minit in hanau, bewaffnet mit der zusammenfassung von michael. dem meister vor ort habe ich gleich mit verschiedensten alternativen zum original zugetextet. der hat nur gelacht, "das interessiere ihn nicht" und zwei passende schlüssel aus dem schrank gezaubert. ![]() ignition key: Mr.Minit #425 (front) door key: Lotus JNE3 Beide passen einwandfrei. Gekostet hat der Spaß (je 2 Ersatzschlüssel) aber um die 37€. | ||||
Es gibt keine Evolutionstheorie, sondern nur eine Liste von Kreaturen denen Chuck Norris erlaubt zu leben.
|
||||
| ||||
|
Hmmm...
das wäre hier etwas günstiger gewesen: http://web2.cylex.de/firma-home/dauth-heinrich-schlosserei-u--schluesseldienst-998805.html Dort habe ich Schlüssel nachmachen lassen. Preis pro Stück ca. 6-8 Euro (2007) Ciao Snoop | ||||
|
||||
| ||||
|
das sagst du mir jetzt
dafür wars schnell und kompetent. beim nächsten volvo ich bin ja immer noch an nem c306 interessiert, dann aber kein h sondern echter umbau... | ||||
Es gibt keine Evolutionstheorie, sondern nur eine Liste von Kreaturen denen Chuck Norris erlaubt zu leben.
|
||||
| ||||
|
Hallo !
ich habe meinen auch einfach und schnell bekommen. Bin in Langenfeld/Rhld. bei einem Metaller gewesen, die bauen auch Türen, etc.. und eben auch schlüssel und Schlösser bekommt man da. Dem habe ich meinen Zündschlüssel in die Hand gedrückt. Hatte auch gleich einen Rohling der schon fast so aussah wie meiner. Kurz in die Maschine eingespannt, fertig. 5 min. Arbeit. dAs ganze hat 7,- gekostet und passt prima. Matthias | ||||
Tgb 1111-A
|
||||
| ||||
|
Nabend Matthias,
die Zündschlüssel sind ja auch nicht das Problem. Eher die Türschlösser. Die Zündschlösser sind ja Boschstandardschlösser, da gibt es ja auch genügend Vorlagen, da die Schlösser heute noch so verkauft werden ![]() | ||||
|
viele Grüsse Frank http://www.auf-allen-vieren.de
|
||||
| ||||
Ach so. by the way. Für meinen hast Du mir nur den von der re. Tür mitgegeben. li. passt der nicht. Matthias | ||||
Tgb 1111-A
|
||||
| ||||
|
Mehr Schlüssel haben die Schweden leider nicht gehabt. Bei meinem hatte ich damals nur einen Zündschlüssel
![]() | ||||
|
viele Grüsse Frank http://www.auf-allen-vieren.de
|
||||
| ||||
|
Per Schloss/Schluessel Kodierung (auf (original)Schluessel und unter die Tuerbekleidung am Schloss) lassen sich Schluessel einwandfrei direkt aus der Komputer heraus fraesen....nix kopier-Fehler, wie neu (auch einen verschlissenen Schluessel kann man so wieder auf die Sprunge helfen!).
Funktioniert uebrigens auch mit Toyota Schluessel....ob die nun 30 Jahre alt sind oder nicht....da ist wirklich (viel) System dahinter, bei jeden guten Schluessel-Anfertiger im Komputer gespeichert.... (das schlechte ist natuerlich dass sich jeder, wenn er mal den (original!) Schluessel in die Hand (und unter Augen) gehabt hat, auch eins nachfertigen koennte) (in dem Sinne waere es schlau normalerweise nur die Kopieschluessel zu benuetzen, die haben ja keine Kodierungsnummer eingestanzt....;)) | ||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||
|
||||
| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |









Autor






Surely I cannot just go to a Volvo dealer and ask for a Key as they will just laugh
but how do I ask the Volvo dealer can I suggest a part number, or a chassis number??
Gespeichert









