| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |
|
||||
Autor
|
Thema: Bobcat and TGB rims? (Gelesen 4030 mal) | |||
| ||||
|
Hi everybody,
yestaeday I was walking on streets and have seen Bobcat cleaning snow. Does anybody knows - are the Bobcat wheel rims are similar with Volvo? http://www.gemplers.com/product/162458/Skid-Steer-Wheel-Bobcat-15x800 ![]() | ||||
|
||||
| ||||
|
you mean a Bobcat like this one?
![]() ...uh ti! At least with these tires a C30x would look really.... really strange Cheers, Miro | ||||
|
||||
| ||||
Thusfar nobody has ever found a matching rim, not even in Sweden....if it *would* indeed match any bobcat, someone would have discovered that years ago.... Note that most of the industrial/truck sizes are larger than 16" as well, and if we assume the below rims are indeed 20/22/24", then the bolt-pattern as such (relatively speaking/looking) would be too large, going by the pictures....even (suppose-) if those rims were 16", it still seems the bolt-circle is larger than on Volvo's (and increasingly worse with larger rims) | ||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||
| ||||
|
If you look at the link in Argens posting, you will see that there are 15” and 16,5” rims. No 16” rims. But we could use 16,5” rims on our cars to. The 16,5” rims has the following specification:
Size: 16.5x8.25 Machine: Bobcat Offset: 0.483" Lug Holes: 8 on 8 Hub Center: 6.00" I guess that “Lug Holes: 8 on 8” means that there are 8 holes for screws with a circle diameter of 8”. Our c30x has a screw circle diameter of 222 mm witch is 8,74”. The offset of our rims are 106 mm, so the bobcat rims with 12 mm offset would stand out a bit outside the vehicles. | ||||
|
Anders Volvo C303, Suzuki RV413, Ford Vedette, Jeep Grand Cherokee, Honda SilverWing, Honda XL250
|
||||
| ||||
|
abce, think U are right...
all these 8-holes rims are 8 inch circle diameter... ![]() http://www.gemplers.com/skid-steer-rims | ||||
|
||||
| ||||
I love your unorthodox way of thinking regarding 16.5"....:)) At first I was pondering whether the extra 6mm on each side cq perimeter (0.5" = 13mm / 2 = 6-7mm) wouldn't be miserable keeping the bead on the rim, tire being larger than the rim. But it's the other way around, 16" tires on 16.5" rims, therefore 6mm tighter, along the entire perimeter. But I do wonder how much more air pressure is needed before such tires pop *onto* the rim. (and also how much more trouble the tire-shop will have to push both beads *over* the rim in the first stage of mounting....:)) PS: I do recall that 16.5" rims have a different shape of hump/rim-edge than 16", being less restrictive, less need for pressure for popping on....so perhaps their bead design is also a bit different, making them more difficult to mount when used on a restrictive rim like 16"? PPS: even more amazing than your unorthodox methode is the fact that there have been no protests whatsoever from the more law-abiding folks here....;)) (perhaps they realized that Argen does not have to suffer the terror of TUV....;)) PPPS: for those still believing that the German TUV is just doing its honorable & non-corrupt work: read the German Oldtimer Markt 12/2010 and 11/2010....TUV-HQ has dictated a 15 or even 20% rate of failures, no matter what....and since some of their larger customers (brand-garages, lease-carparks) won't accept exaggerated dismissals, the ordinary citizen has to suffer at a double rate. | ||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||
| ||||
|
It would be tuff mounting 16" tires on 16,5" rims. I would prefer using 16,5" tires.
| ||||
|
Anders Volvo C303, Suzuki RV413, Ford Vedette, Jeep Grand Cherokee, Honda SilverWing, Honda XL250
|
||||
|
||||
| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |









Autor








Gespeichert



