kleiner tgb 11 links
| C303 HOME Deutsch | C303 HOME English |
kleiner tgb 11 rechts

News: Forums-Migration in Planung, siehe Das-Letzte-Wort

Willkommen, Gast. Bitte Login oder Registrieren.

  22.November 2026 19:24:20

Seiten: [1] Antwort Überwachen Senden Sie dieses Thema Drucken
   Autor  
All-Posts
 Thema: bmw-123d engine  (Gelesen 11201 mal)
Anthony

**

Offline

Einträge: 384





Profil anzeigen
bmw-123d engine
« am: 17.Dezember 2007 14:3:19 »
Antwort mit Zitat nach oben
An example of the sort of engine I like is the one found in the BMW 123d

http://www.modifiyem.com/forum/showthread.php?p=1389459

204 BHP or 152KW @ 4400 rpm

295 ft lbs or 400Nm @ 2000 rpm

No turbo lag due to 2 very small variable turbos.  Torque comes right the way down.  Small and very light due to all aluminium construction.  Good rpm max.

i would like to have posted an image of the curve and engine but do not have a clue how it is done.

by michael:Take this:

Grüße


Anthony
GB
« Letzte Änderung: 17.Dezember 2007 17:25:42 von michael » Moderator benachrichtigen   Gespeichert
Anthony

**

Offline

Einträge: 384





Profil anzeigen
Re:bmw-123d engine
« am: 17.Dezember 2007 18:17:10 »
Antwort mit Zitat nach oben
Thank you Michael,

That is good and in a better place. smiley
Grüße


Anthony
GB
Moderator benachrichtigen   Gespeichert
Anthony

**

Offline

Einträge: 384





Profil anzeigen
Re:bmw-123d engine
« am: 18.Dezember 2007 10:58:57 »
Antwort mit Zitat nach oben
Having an engine with a complex engine management system does not concern me in the least.  I think that I shall not be driving in The farthest reaches of the Former Soviet Union.  I know that very few engines in fact survive there for very long.  I do think that such an engine will run happily throughout Europe and North Africa and in any case it would be a wise precaution to incorporate more robust filtering and water separators.  I agree that the Electronics need to be protected from direct water and dust. 
If I were using such an engine it would be with its attendant gear box as I am not specifically wanting to keep the TGB unit or even the transfer box for that matter.  I see that my best scenario would be to change Engine gearbox and transfer box all in one go out of another vehicle.  I should then not have to spend years trying to match components or make sandwich plates etc.  Unless the illustrated engine and its attendant gear box matched to say a Rangerover transfer box or something like that then I would not be likely to proceed very much more with it. 
I just like modern technology and eventualy this will be robust after all I as I have said on other forums that I would not like to be still manually adjusting the advance , hand pumping the oil to the engine or petrol to the cabs, eventualy everything will be electronically governed.  Even the beautiful Steyr engines are electronic though they do have a limp home facility.  I like the Steyr engine very much but in the 6 cylinder at least they are very heavy according to there literature and the 4 cyl may be better suited to the TGB by size and weight but power outputs modest.  Thee would still be the problem of  finding a suitable gear box and transfer box.

An other Engine + Gearbox + transfer box that I like is one I mentioned on this site before and it is from the most recent Landrover Defender.  It uses a Ford engine and 6 speed gear box as found in Ford Transits, Mondeo and others and it all bolted nicely onto a Landrover Transfer box.  Which also has the same UJ as the Volvo, the biggest part of the engineering might be in having the props cut and balanced grin  The advantage of this would be a proven system in all parts of the globe with easily attained parts from Landrover and Ford and many other places as well that used ford parts which is quite a number.
Grüße


Anthony
GB
Moderator benachrichtigen   Gespeichert
Anthony

**

Offline

Einträge: 384





Profil anzeigen
Re:bmw-123d engine
« am: 18.Dezember 2007 14:29:15 »
Antwort mit Zitat nach oben
Hi Chris,

Yep I know that the original car engine has little power that is one of the reasons why I would wish to use the gear box that an engine may come with as this can easily handle the power.  It is still early days for me, there are lots of engines around and some new ones coming.  The thing is many manufacturers these days share the same technology and when one looks up in Google about a specific engine one often finds it also being used in some other manufacturers car as well and then one sees another engine waiting in the wings. 

I would have liked a modern car similar to the latest Pinzgauers but that is mega bucks and even if one could afford a mortgage for one then buying a new one would be very difficult to say the least.  I have bought what best I can afford for the money for my purposes, nothing is perfect and everything is a compromise and a trade off for something else and that inclues things like engines.  I am unlikely to ever be able to travel to exotic laces like eastern Russia unfortunately or Malaysia and China.  It is not essential to have a ship engine that will consume all fuel types and even if I did ever go to these place what percentage of the vehicles time would be spent driving there.  I will be using my vehicle regularly (when I get it registered rolleyes) I want an economic and reliable truck that has good performance that will allow me to do my off road camping as I have done for many years in GB and to be able to travel further afield to places like Iceland and many interesting remote places in Europe and North Africa if possible.  I feel that the BMW engine above is a possibility but not a certainty.  BMW make a lot of very good engines the 6 cylinder 330d is a lovely unit found in many states of tune it is just that the 123d is more recent and an all Aluminium design that is lighter by far and that offers a lot of advantages as I see it.

It is also an ilustration that small can be buetiful one does not have to use the largest lump of iron to achieve a goal, but nothing is in stone as yet.  I am just looking casualy at the present.
Grüße


Anthony
GB
Moderator benachrichtigen   Gespeichert
Anthony

**

Offline

Einträge: 384





Profil anzeigen
Re:bmw-123d engine
« am: 18.Dezember 2007 21:29:39 »
Antwort mit Zitat nach oben
WJM,

Deja-vu, I was just mentioning the D5 on the Pinzgauer Forum, returned to this one and hey that is exactly what your talking about.

I looked about a little bit evidently the D5 all Aluminium engine is especially narrow so it should make an easier fit into the engine bay.

http://www.motorsportscenter.com/article_165.shtml

http://media.ford.com/newsroom/feature_display.cfm?release=20693
Grüße


Anthony
GB
Moderator benachrichtigen   Gespeichert
Anthony

**

Offline

Einträge: 384





Profil anzeigen
Re:bmw-123d engine
« am: 19.Dezember 2007 10:45:17 »
Antwort mit Zitat nach oben
A link to some D5 conversations we had at an earlier time.

http://www.c303.de/c303-forum/index.php?board=36;action=display;threadid=7804

smiley
Grüße


Anthony
GB
Moderator benachrichtigen   Gespeichert
Seiten: [1] Antwort Überwachen Senden Sie dieses Thema Drucken
Powered by MySQL Michaels-Volvo-Offroader-Forum | © 2001-2004 YaBB SE
forked to php5 & mysql-5 & XHTML in 2009 by mibu
lifted to php8.2 in 2024 by mibu
Powered by PHP

| Datenschutz | Impressum |

Seite erstellt in 0.0658 Sekunden. 19 Queries.