| Michaels-Volvo-Offroader-Forum | SPEZIELLE THEMEN | Antriebskraft / power | « vorheriges Thema folgendes Thema » |
|
||||||||
Autor
|
Thema: Diesel, wer hat schon erfahrung (Gelesen 23075 mal) | |||||||
| ||||||||
|
Hallo Leute,
Ja wir sind hier und auch mit den TGB noch sehr neu. Persönlich ist mein Herz auf einen "TGB 13 Flach" gefallen, ich Hoffe die bezeichnung ist richtig. ![]() Nun da ich überzeugter Diesel Fahrer bin, grade von meinem T3 Syncro Benziner enttäuscht worden bin. Möchte einen Diesel einbauen. In meinen Bus muß jetzt auch ein Diesel rein. ![]() Ich habe schon viel im Forum gelesen und auch viele Info bekommen. Nur scheint dies für viele Neuland zu sein und deshalb gibt es wenig berichte. Sicherlich kommt die frage auf, ob sich dies lohnt umzubauen. Nun für den einen schon für den anderen nicht. Sicherlich auch geschmackt (bzw. vorliebe) für oder gegen Diesel. Nun würde ich doch gerne wissen, wer hat den schon einen Diesel drin oder einen gefahren? - Welchen Motor? (beim Bulli kommt wohl ein mTDI, 1,9l mit wLLK und Öl-Kühler, der wiegt aber auch nur max. 3,0T) - Wie hat sich euer Verbrauch auf der Straße, normal 80-90 verändert? - Wie sieht es aus unter Last, genug Kraft vorhanden? - Orginal Getriebe oder das vom Fremd Motor? Nun bedanke ich mich, schon mal im Vorraus. Mike ![]() | ||||||||
|
||||||||
| ||||||||
|
Moin Mike,
das Problem mit dem Dieselumbau fängt schon bei der Zulassung an. Es gibt in Schweden einen Umbausatz auf den 300 D aus dem 124er Benz zukaufen. Aber der Motor kostet einiges an Steuern und unter 13 Liter diesel wirst du ihn in im Volvo bestimmt auch nicht bekommen. Dann kommt das Thema mit dem H-Kennzeichen. das kannst du dann voll knicken. Also keine Steuervorteile !!! Von den Kosten für den Umbau ganz zuschweigen, so ein Motörchen ist nicht unter 1500,- € zubekommen. Jedenfalls in vernünftiger Qualität ![]() Interessant wäre da eher ein Umbau auf Flüssiggas, aber auch das rentiert sich nur wenn du sehr viel mit dem Volvo fahren willst. | ||||||||
|
viele Grüsse Frank http://www.auf-allen-vieren.de
|
||||||||
| ||||||||
|
Hallo Yankee,
Vielen Dank für Deine Antworten. H-Kennzeichen ist nicht wichtig und mit den steueren auch nicht da ich Ihn in Schweden zulassen würde. Ich möchte mich nur im vorraus erkundigen, was man zu erwarten hat. Eine kurze frage, was für eine stehhöhe hast Du hinten drin? Mike | ||||||||
|
||||||||
| ||||||||
|
Hier gibt es ein paar Schnittzeichnungen
http://www.c303.de/c303-de/allviews.htm Höhe beim TGB13 = TGB11 = 126cm hinten und 136 cm mitte. von "Steh"höhe kann man da nicht reden... ![]() Gruß Michael | ||||||||
"oh, for sure, you can do it with a normal streetcar...."
|
||||||||
| ||||||||
Klar kann man drin stehen, allerdings nur an einer Stelle und dann auch nur ein Erwachsener ![]() Oder wozu gibt es die Dachluke ![]() | ||||||||
|
viele Grüsse Frank http://www.auf-allen-vieren.de
|
||||||||
| ||||||||
| ||||||||
|
Ich bin nicht Bud Spencer!!! Dazu fehlt mir der Vollbart!
|
||||||||
| ||||||||
Die ist zum Duschen... michael | ||||||||
"oh, for sure, you can do it with a normal streetcar...."
|
||||||||
| ||||||||
Moin, ich würde mal sagen außer dem professionellem Umbau von www.smt.nu in Schweden auf OM603 gibt es weltweit höchstens drei oder vier, die (heute noch) Diesel im C30x fahren. Ich weiß von zwei Umbauten (außer SMT) , die heute noch existieren: - ein Umbau auf Nissan SD33 unter Verwendung vom Nissan Schalt- und Verteilergetriebe - ein Umbau auf Nissan SD33 unter Beibehaltung der orginalen Getriebe Für den letzteren Umbau kannst du sogar die Umbau-Teile kaufen (ca. 800 Euro) Ein Umbau auf Iveco(?)-Saugdiesel, Verbleib unbekannt und ein Umbau auf Volvo FT-Diesel (LKW), Verbleib unbekannt. Ich selber würde gerne auf Diesel umbauen, werde aber durch Zeit- und Geldmangel gebremst ![]() Der VW-4-Zylinder TDI paßt nicht, bzw. er paßt nur, wenn man Generator und Servopumpe an andere Einbauorte verlegt. Der Einbauraum im C30x ist schmal, breit bauende Motoren (immer incl. Nebenaggregate betrachten !) gehen nicht hinein. Dafür ist Länge da, 6-zylinder-Reihe macht also keine Probleme. Der Umbau ist nicht trivial, im Detail sind sehr viele Fallgruben zu umgehen. Die TDI-Umrüstung im VW T3 ist ein Kinderspiel dagegen ! Gruß Jens | ||||||||
|
Aristoteles (384 – 322 v. Chr.) Wer Sicherheit der Freiheit vorzieht ist zu Recht ein Sklave
|
||||||||
| ||||||||
|
TGB_11 ,
Am I correct in the translation that you say the WV TDI will not fit? Is this the VW 1.9 TDI? Nissan SD33 is I believe an indirect injection and I believe that the OM603 is indirect injection please correct me if I am wrong. Is there a Direct Inection TDI that might fit? Perhaps the Ladrover 200/300 TDI, TD5 or even better the Ford engine in the most recent Defender? might even the BMW 6cyl unit from a Range Rover Fit? | ||||||||
|
Grüße Anthony GB
|
||||||||
| ||||||||
Hi Anthony, I mean, the VW 1,9l TDI (4-cylinder) does not fit, because the position of generator, injection-pump, oilfilter-mount on the left side of engine-block hinder the mounting. If you you want to leave the C303 gearbox and T-case, the engine have to mount asymmetric, a little more to the left side of engine compartment. The cardan shaft from T-case to front axle continues near the oilsump of the engine and you can´t mount the engine more to the right side without big problems. Hence you need diesel engines without big auxiliary equipment on the left side. I don´t know, which diesel-engines are fit, but I can say, what I check myself und what you can find in www. VW 1,9l TDI (4-cylinder, rotation-pump, direct injection): In my humble opinion too hard to fit (I checked it myself) VW 2,5l TDI (5-cylinder, rotation-pump, direct injection): fits good ! (my favorite) VW 2,4l D and TD (6-cylinder, rotation-pump, indirect injection): fits good Nissan SD33 (indirect injection): fits good Nissan SD33T (turbo): more difficult than SD33 becauso the turbo is on left side Mercedes OM602 (5-cylinder, indirect injection): should be ok, don´t know about turbo Mercedes OM603 (6-cylinder, indirect injection): ok, but don´t know about turbo About other diesel-engine you have to check yourself. jens | ||||||||
|
Aristoteles (384 – 322 v. Chr.) Wer Sicherheit der Freiheit vorzieht ist zu Recht ein Sklave
|
||||||||
| ||||||||
The Volvo D5, line-5, TDi, fits; adapter-kits are available from Tatanka, complete kit including engine is 75000 SEK I believe (without labour). This is the configuration used in Dakar 2002 or 2003, with TGB11 core and XC70 body, plus 11.00x16 Michelin's....about 170hp, 400Nm, on stock (military/small!) clutch and 4sp, no further modifications. (I believe SMT also offers/offered a kit for this engine, once ordered by Claes Hellbom, but apparently he wanted to improve it a bit further) However, the D5 is not just 'a' TDi, but with common rail injection pump, which means it is even more critical in terms of fuel quality than a +95 octane gasoline. Only pump-injector TDi's can cope with lousy quality of diesel.... Most fascinating engine with pump-injector is the Steyr M1 series, both line-4 and line-6, 2.3L and 3.2L, specifically designed to run on all kinds of crap fuel, from Nato jetfuel to kerosene to 'offhighway fuel' (eufemistic term for diesel contaminated with water and/or lighter fractions) as well as thick vegetable oil. And all that with a lovely mix of full electronic control (input and (PC-compatible) output parameters) combined with a full mechanical override, plus various limp-home modes (including one that allows driving on after complete coolant loss(!)....who needs an aircooled engine when you have that!....:)) | ||||||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||||||
| ||||||||
|
TGB_11 , & WJM,
Thank you both for your speedy responses. I am glad that there are some Direct Injection Engines that have been found to fit the TGB. To my mind this is a better option than Indirect Injection because of greater efficiency equating to more power and lower consumption. Together with ease of starting without the need for heater plugs. I shall have to read up on the Volvo D5 TDI and the VW. I like the idea of using a light high speed Modern TDI. There are a whole host of new diesels from BMW and the VW Audi group, aimed specifically at cars perhaps, but chucking out loads of toque over a wide rev range. Usefully too is that they rev to relatively high speeds perhaps diminishing the urgency for dramatically higher gearing. The Steyr M1 series is a very interesting engine not least in its untypical construction. I think that the injection side is very robust and ideal if traveling in third word conditions. It is probably capable of very heavy work under extreme conditions. Unfortunately the rev range is rather modest making gearing problematical I think. I also wonder also if supply of used examples might be a little slow. | ||||||||
|
Grüße Anthony GB
|
||||||||
| ||||||||
It revs up to 4500rpm, have seen at least one 4800 sample/application, should be plenty for a TGB. But I would not consider a modern/small car-TDi easily, unless pump-injector....too vulnerable for lousy quality of diesel. There is also one TGB-sample with the 4.2L Land Cruiser TDi....still rotating pump, but not as vulnerable as a true high pressure common rail.... (I have experienced it stalling multiple times on a steep hairpin road in the Alps, full-throttle restarts until reaching a safe haven, after the tank was filled with gasoline instead of diesel....local mechanic already declared it trash, when he heard the story....but after cleaning all fuel components, it started as if nothing happened, and purrs happily until this very day, several 100k later) Btw, you *can* find both M14 and M16 in Russian vehicles no less, car/van & truck, production since a year or 5. But I also found the M16 in a Chinese semi-military vehicle, both 4x4 and 6x6, both low-profile/Humvee-style and taller cab/truck-style....and to topp it off, with rigid portal axles (but no bogie-tandem rear axle construction sadly (but inter-axle-independant coil springs instead)....and a lovely range of options like PTO, CTIS, auto or manual(!). Stay tuned for more info (if the official requests fail, I will send a Chines friend living nearby to the factory....:)) And I have also heard from official Steyr distributors that the Chinese are currently trying to sell these license-production engines in Europa, but that might be only for the more 'stationary' marine or generator market, not automotive (although the core differences are probably small, if at all). Btw engine space in TGB: I have concept-drawings of a C606, with Jaguar 5.3L V12, as a firefighter-project for Copenhagen Airport (that never materialized, discarded at a cost-difference of 8000 over some crap USA pickup)....and approved both by Volvo and Jaguar....so at least *a* V-engine fits, although it doesn't help you one silly bit in fuel consumption....:)) (personally, given the fact that a V-engine might fit, I would rather try the 6.9L V8 from the MB 450SEL, because it was the *only* european engine of that time with dry-sump lubrication....solving most of the offroad-typical problems of using a car engine in a 4x4) (I am only not sure whether the stock clutch could cope with the massive 550Nm torque (horsepower is exactly equal to the Jaguar, 286, but torque probably isn't....:)) | ||||||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||||||
| ||||||||
|
I just want to warn that one should stay near the original range of refs and torque,
if you want to keep the original gearboxes and diffs. It is not a good idea to go faster than 110 km/h with the original gearing in the portals, the diffs and the auxiliary gearbox. These elements don't like high refs. It would be a hard work to change the complete powertrain, and if you try you can start from scratch with a set of other portal axles etc. Don't expect more speed. C30x is going slowly and will stay going slowly. michael | ||||||||
"oh, for sure, you can do it with a normal streetcar...."
|
||||||||
| ||||||||
The Dakar vehicle did 160km/h continuously, with 1.5x overdrive and 11.00x16 tires....:)) (if you go just by the books, even those tires shouldn't have lasted!) Yes, they initially had overheating problems with the transfercase, and couldn't figure out the cause....until someone accidently switched *off* the auxiliary electric oil-pump for that T-case, after which they concluded that it was the bloody pump itself that heated the oil, and that the entire cooling system was utterly useless....8-))
Especially the LWB 6x6 is just too damn stable to *not* venture in that direction....:)) Also: if it can run full throttle at 80km/h with *full* load, it surely can run 120km/h empty. Btw, one of my additional crazy plans is to mount a large marine gyroscope-stabilizer on the rear cargo floor, for even more stability....weight and current draw is manageable....:)) Marine supplier already declared me crazy, but couldn't come up with plausible counter arguments (other than steering towards oscillation frequency parameters), so that didn't impress me much....;)) Anyone want to sponsor me for the next Hamburg->Shanghai rally?....:)) | ||||||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||||||
| ||||||||
|
Btw, this C606 for Copenhagen Airport with Jaguar V12 was also *designed* to run 160km/h....:))
With full approval from both Volvo and Jaguar. Not an application/deployment where it would run that speed for more than 5km, but still....:)) Actually, it says 'in access of 160km/h', but perhaps the runways were to short for anything above that....;D 0-80km/h in 15s, 0-100km/h in 21.5s....oh well, maybe they anticipated a larger airport with longer runways in the distant future....;D | ||||||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||||||
| ||||||||
|
Perhaps if a V Engine will fit, that might mean that the Discovery 3 V6 TDI might go in. The only problem with some of these engines is that they have a mass of ancillary equipment bristling all over them which makes them look very huge. Of course LR can offer an extra pair of cylinders in that configuration and that has been developed for off road use.
It may well be that the easiest way to go about fitting these might be to keep the gear boxes insitu. Perhaps I should break my own Toyota landcruiser HDJ80 1HDT ? It is interesting that it fits as it is a huge engine. I wonder about the dynamic stability with such a weighty unit. Perhaps it would need your gyroscope WJM! Talking of which would not direction changes be very difficult even if such a thing were possible, the gyroscope I mean .I have to admit that I am only postulating here, am still to purchase a suitable TGB 13. It is though with some keen interest that I speculate. In my case, a suitable engine will not be new but from a suitable broken vehicle and I have some other modifications planed that might precede a re-engine. | ||||||||
|
Grüße Anthony GB
|
||||||||
| ||||||||
Yep....the extra complication of rebuilding the rod-linkage to both boxes, even more with one stick, is probably mind-boggling. While the logical alternative, using only an automatic transmission, and leave the T-case intact, will fail on both length (auto's are mostly longer than manuals) and the fact that you then defacto loose the nice double-synchronisation of the T-case....since it is much easier/safer to declutch a manual transmission at high speed than switching an auto into Neutral and back....
Well, compared to a TGB20, a TGB13 has some extra margin, and compared to the heavy front-mounted electric winch of a C306 firefighter, you have another 50-100kg gain....;))
Nope, not if the axis of the gyro-wheel is vertical (wheel itself horizontal)....it should only resist vehicle side-swing (roll) and nose-dive (pitch), not rotation like in corners. Interesting side effect is that *once* you do get off-camber (roll) at high speed, it will *stay* off-camber, whether there is anything below the high-side wheels or not....;D
The stock engine isn't bad, it's the octane-requirement that is most disturbing on longer tours in remote area's....more than just fuel consumption. If I could solve that easily, I would have much less reason to look into a complicated diesel conversion....no matter how much I like diesels. | ||||||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||||||
| ||||||||
|
WJM,
The poor quality diesel fuel that you mention, is this a problem for the engine management systems of common rail systems or the injectors? Especially with the trend towards pezzo nozzles is this going to become more acute? If it is only a mechanical problem with fouling, then would not extra fuel filters and and water separator solve the problem. Agricultural vehicles have been using these things for years. The red diesel that is used for Agricultural purposes in GB is often not the same as pump fuel, it occasionaly has water in it and has less additives. The tanks that store this fuel on farms are often contaminated with water, sludge, including rust and often microbes that cloud the fuel, yet the filtration systems have to cope. Occasionally filtration systems do have to be dismantled in the field but it is no big problem. | ||||||||
|
Grüße Anthony GB
|
||||||||
| ||||||||
It's the pump, not the nozzles....pump needs high-quality fuel for lubrication and cooling....the higher the pressure, the smaller the mechanical margins, the higher the lubrication/cooling requirements.
*Modern* agricultural diesels are *not* allowed to run on red/taxfree/poor-quality diesel anymore! And you can't filter out lighter fractions of oil, like you can with water....
Steyr uses the lovely euphemistic term 'off-highway fuel'....:)) And yes, that is the crap that you will get in remote area's, but it is more than water, it can also contain lighter oil fractions, which can and will kill high-pressur rotating injection pumps, because it affects lubrication, and with that, cooling. Btw, another typical & certain death-sentence for such pumps is running out of fuel at high speed....no more lubrication, and worse, no more cooling. Btw, I only recently learned that in our oldtimer-rally last year, through Siberia and Mongolia, some youngtimer vehicles with injection engines got stranded because of water-contamination of gasoline....with tanks found with 25 (TWENTYFIVE) percent of water.... ('carburator-engines don't care one bit', one of the chief-mechanics concluded with a wide grin....;)) You *don't* want a vulnerable diesel in those conditions.... | ||||||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||||||
|
||||||||
| Michaels-Volvo-Offroader-Forum | SPEZIELLE THEMEN | Antriebskraft / power | « vorheriges Thema folgendes Thema » |









Autor










Gespeichert








Talking of which would not direction changes be very difficult even if such a thing were possible, the gyroscope I mean
.