| Michaels-Volvo-Offroader-Forum | SPEZIELLE THEMEN | Antriebskraft / power | « vorheriges Thema folgendes Thema » |
|
||||
Autor
|
Thema: gearbox ratio modification (Gelesen 2930 mal) | |||
| ||||
|
so i planed to convert a c304 or c303 in to a vw 5cyl tdi engine, i want to know if there any solution to have lower rpm at higher speed ?
special pignon ? or special final ratio ? thanks | ||||
|
||||
| ||||
|
hi david,
for basic diesel conversion discussion there is already a giant thread here. have a look, perhaps there are already some answers or thoughts in it. also for engine conversion, the forum has a special main topic "Spezielle Themen/ Antriebskraft & Power" ![]() | ||||
Es gibt keine Evolutionstheorie, sondern nur eine Liste von Kreaturen denen Chuck Norris erlaubt zu leben.
|
||||
| ||||
|
thanks for help , i'm not verry familliar with german language .
i go immediatly read this post . ![]() | ||||
|
||||
| ||||
|
David,
I was just wondering what translation service you might using, or are you doing it your self?
| ||||
|
Grüße Anthony GB
|
||||
| ||||
|
no for the moment i just read the post in english...
![]() but for german traslation i use google , not often understandable ... ![]() | ||||
|
||||
| ||||
|
Yep, I usualy use Google as well but I am considering buying a download translator as I also find Google lets one down occasionaly and the others are painful to use. Your English is very good is that also Google?
![]() | ||||
|
Grüße Anthony GB
|
||||
| ||||
|
Here a matrix to show the velocity vs. engine-speed for genuine C303-gearbox and C303-axle-ratio
tires 255/100R16 2,798 m Michelin XZL speed 1.g 1.g 2.g 2.g 3.g 3.g 4.g 4.g engine low high low high low high low high 1.000 3,0 7,2 5,6 13,5 8,4 20,1 11,7 28,0 1.100 3,3 8,0 6,2 14,8 9,3 22,2 12,9 30,8 1.200 3,6 8,7 6,8 16,2 10,1 24,2 14,1 33,6 1.300 3,9 9,4 7,3 17,5 11,0 26,2 15,2 36,4 1.400 4,2 10,1 7,9 18,8 11,8 28,2 16,4 39,2 1.500 4,5 10,9 8,5 20,2 12,6 30,2 17,6 42,0 1.600 4,8 11,6 9,0 21,5 13,5 32,2 18,7 44,8 1.700 5,1 12,3 9,6 22,9 14,3 34,3 19,9 47,6 1.800 5,5 13,0 10,1 24,2 15,2 36,3 21,1 50,4 1.900 5,8 13,7 10,7 25,6 16,0 38,3 22,3 53,2 2.000 6,1 14,5 11,3 26,9 16,9 40,3 23,4 56,0 2.100 6,4 15,2 11,8 28,3 17,7 42,3 24,6 58,8 2.200 6,7 15,9 12,4 29,6 18,5 44,3 25,8 61,6 2.300 7,0 16,6 13,0 31,0 19,4 46,3 27,0 64,4 2.400 7,3 17,4 13,5 32,3 20,2 48,4 28,1 67,2 2.500 7,6 18,1 14,1 33,7 21,1 50,4 29,3 70,0 2.600 7,9 18,8 14,6 35,0 21,9 52,4 30,5 72,8 2.700 8,2 19,5 15,2 36,4 22,8 54,4 31,6 75,6 2.800 8,5 20,3 15,8 37,7 23,6 56,4 32,8 78,4 2.900 8,8 21,0 16,3 39,0 24,4 58,4 34,0 81,2 3.000 9,1 21,7 16,9 40,4 25,3 60,4 35,2 84,0 3.100 9,4 22,4 17,5 41,7 26,1 62,5 36,3 86,8 3.200 9,7 23,2 18,0 43,1 27,0 64,5 37,5 89,6 3.300 10,0 23,9 18,6 44,4 27,8 66,5 38,7 92,4 3.400 10,3 24,6 19,2 45,8 28,7 68,5 39,8 95,2 3.500 10,6 25,3 19,7 47,1 29,5 70,5 41,0 98,0 3.600 10,9 26,1 20,3 48,5 30,3 72,5 42,2 100,8 3.700 11,2 26,8 20,8 49,8 31,2 74,5 43,4 103,6 3.800 11,5 27,5 21,4 51,2 32,0 76,6 44,5 106,4 3.900 11,8 28,2 22,0 52,5 32,9 78,6 45,7 109,2 4.000 12,1 28,9 22,5 53,9 33,7 80,6 46,9 112,0 4.100 12,4 29,7 23,1 55,2 34,6 82,6 48,0 114,8 4.200 12,7 30,4 23,7 56,5 35,4 84,6 49,2 117,6 4.300 13,0 31,1 24,2 57,9 36,2 86,6 50,4 120,4 I mean, the velocity of 112 km/h at the nominal rotation speed (4000rpm) of a VW-diesel engine are ok. | ||||
|
Aristoteles (384 – 322 v. Chr.) Wer Sicherheit der Freiheit vorzieht ist zu Recht ein Sklave
|
||||
| ||||
|
TGB_11
that is very kind of you to display your in gear speed figures and also your sharing of information concerning your findings regarding to various diesel engines that you have examined. I thank you for all your work in this direction and the good advice that you suggest to us when we bring things into discussion. ![]() | ||||
|
Grüße Anthony GB
|
||||
| ||||
thanks for my english , but it's only shool english and some direct live practice ( thanks to my previous job ) | ||||
|
||||
| ||||
big thanks for this numbers ! so i see with them that i just have to change tyre size to have what i want. use torque arround 3000 at 90km/h i think its possible with 39" tyre. | ||||
|
||||
| ||||
please note, that I wrote the table for the C303 with axle-ratio 5.995 If you want to swap to diesel at C304 you will get a big problem with the axle ratio of 7.086. here the table for C304 with the biggest tires, which are possible because the distance at the double-axle allows only 1 m diameter for tires tire circumference 11.00R16 3,000 m Michelin XZL (diameter of these tires are nearby 1 m) Drehzahl 1.Gang 1.Gang 2. Gang 2. Gang 3. Gang 3. Gang 4. Gang 4. Gang Motor low high low high low high low high 1.000 2,7 6,6 5,1 12,2 7,6 18,3 10,6 25,4 1.100 3,0 7,2 5,6 13,4 8,4 20,1 11,7 27,9 1.200 3,3 7,9 6,1 14,7 9,2 21,9 12,8 30,5 1.300 3,6 8,5 6,6 15,9 9,9 23,8 13,8 33,0 1.400 3,8 9,2 7,2 17,1 10,7 25,6 14,9 35,6 1.500 4,1 9,8 7,7 18,3 11,5 27,4 15,9 38,1 1.600 4,4 10,5 8,2 19,5 12,2 29,2 17,0 40,6 1.700 4,7 11,2 8,7 20,8 13,0 31,1 18,1 43,2 1.800 4,9 11,8 9,2 22,0 13,8 32,9 19,1 45,7 1.900 5,2 12,5 9,7 23,2 14,5 34,7 20,2 48,3 2.000 5,5 13,1 10,2 24,4 15,3 36,5 21,3 50,8 2.100 5,8 13,8 10,7 25,6 16,1 38,4 22,3 53,3 2.200 6,0 14,4 11,2 26,9 16,8 40,2 23,4 55,9 2.300 6,3 15,1 11,8 28,1 17,6 42,0 24,4 58,4 2.400 6,6 15,8 12,3 29,3 18,4 43,9 25,5 61,0 2.500 6,9 16,4 12,8 30,5 19,1 45,7 26,6 63,5 2.600 7,1 17,1 13,3 31,8 19,9 47,5 27,6 66,0 2.700 7,4 17,7 13,8 33,0 20,6 49,3 28,7 68,6 2.800 7,7 18,4 14,3 34,2 21,4 51,2 29,8 71,1 2.900 8,0 19,0 14,8 35,4 22,2 53,0 30,8 73,7 3.000 8,2 19,7 15,3 36,6 22,9 54,8 31,9 76,2 3.100 8,5 20,3 15,8 37,9 23,7 56,6 32,9 78,7 3.200 8,8 21,0 16,4 39,1 24,5 58,5 34,0 81,3 3.300 9,1 21,7 16,9 40,3 25,2 60,3 35,1 83,8 3.400 9,3 22,3 17,4 41,5 26,0 62,1 36,1 86,4 3.500 9,6 23,0 17,9 42,7 26,8 64,0 37,2 88,9 3.600 9,9 23,6 18,4 44,0 27,5 65,8 38,3 91,4 3.700 10,2 24,3 18,9 45,2 28,3 67,6 39,3 94,0 3.800 10,4 24,9 19,4 46,4 29,1 69,4 40,4 96,5 3.900 10,7 25,6 19,9 47,6 29,8 71,3 41,4 99,1 4.000 11,0 26,3 20,4 48,8 30,6 73,1 42,5 101,6 4.100 11,3 26,9 20,9 50,1 31,3 74,9 43,6 104,1 4.200 11,5 27,6 21,5 51,3 32,1 76,8 44,6 106,7 4.300 11,8 28,2 22,0 52,5 32,9 78,6 45,7 109,2 on the highway you could use only a constant velocity of 88 km/h (3500 rpm) for longer time jens | ||||
|
Aristoteles (384 – 322 v. Chr.) Wer Sicherheit der Freiheit vorzieht ist zu Recht ein Sklave
|
||||
| ||||
|
Jens,
Thank you for projecting the figures or the axle ratio of 7.086 using 11.00 tyres. There is a problem with using a heavy diesel engine and also using bigger tyres and that is the C of G is going up making a potential tip over more likely. To help offset this the track width needs to be widened either by using new wheels with a bigger offset or some sort of wheel spacer. It gets worse if any one is considering using a disc brake conversion based on the Portal Trek design. One of the Portal Trek suppliers / engineers told me that with this conversion the track is reduced slightly, no big problem he says just use wheels with a bigger offset, this could just compound a problem if not addressed. Jens, do you have a projection easily to hand for axle ratio of 7.086 with 9.00 tyres or other popular large tyre diameters. I do not intend for you to go to any trouble just if you have the figures already, saves me from working it out ![]() | ||||
|
Grüße Anthony GB
|
||||
| ||||
No problem 315/75R16 2,758 m Cooper STT Drehzahl 1.Gang 1.Gang 2. Gang 2. Gang 3. Gang 3. Gang 4. Gang 4. Gang Motor low high low high low high low high 1.000 2,5 6,0 4,7 11,2 7,0 16,8 9,8 23,4 1.100 2,8 6,6 5,2 12,3 7,7 18,5 10,7 25,7 1.200 3,0 7,2 5,6 13,5 8,4 20,2 11,7 28,0 1.300 3,3 7,8 6,1 14,6 9,1 21,8 12,7 30,4 1.400 3,5 8,4 6,6 15,7 9,8 23,5 13,7 32,7 1.500 3,8 9,1 7,0 16,8 10,5 25,2 14,7 35,0 1.600 4,0 9,7 7,5 18,0 11,2 26,9 15,6 37,4 1.700 4,3 10,3 8,0 19,1 11,9 28,6 16,6 39,7 1.800 4,5 10,9 8,5 20,2 12,7 30,2 17,6 42,0 1.900 4,8 11,5 8,9 21,3 13,4 31,9 18,6 44,4 2.000 5,0 12,1 9,4 22,5 14,1 33,6 19,5 46,7 2.100 5,3 12,7 9,9 23,6 14,8 35,3 20,5 49,0 2.200 5,6 13,3 10,3 24,7 15,5 37,0 21,5 51,4 2.300 5,8 13,9 10,8 25,8 16,2 38,6 22,5 53,7 2.400 6,1 14,5 11,3 26,9 16,9 40,3 23,4 56,0 2.500 6,3 15,1 11,7 28,1 17,6 42,0 24,4 58,4 2.600 6,6 15,7 12,2 29,2 18,3 43,7 25,4 60,7 2.700 6,8 16,3 12,7 30,3 19,0 45,4 26,4 63,0 2.800 7,1 16,9 13,2 31,4 19,7 47,0 27,4 65,4 2.900 7,3 17,5 13,6 32,6 20,4 48,7 28,3 67,7 3.000 7,6 18,1 14,1 33,7 21,1 50,4 29,3 70,1 3.100 7,8 18,7 14,6 34,8 21,8 52,1 30,3 72,4 3.200 8,1 19,3 15,0 35,9 22,5 53,8 31,3 74,7 3.300 8,3 19,9 15,5 37,0 23,2 55,4 32,2 77,1 3.400 8,6 20,5 16,0 38,2 23,9 57,1 33,2 79,4 3.500 8,8 21,1 16,4 39,3 24,6 58,8 34,2 81,7 3.600 9,1 21,7 16,9 40,4 25,3 60,5 35,2 84,1 3.700 9,3 22,3 17,4 41,5 26,0 62,2 36,2 86,4 3.800 9,6 22,9 17,9 42,7 26,7 63,8 37,1 88,7 3.900 9,8 23,5 18,3 43,8 27,4 65,5 38,1 91,1 4.000 10,1 24,1 18,8 44,9 28,1 67,2 39,1 93,4 4.100 10,4 24,7 19,3 46,0 28,8 68,9 40,1 95,7 4.200 10,6 25,3 19,7 47,2 29,5 70,6 41,0 98,1 4.300 10,9 25,9 20,2 48,3 30,2 72,2 42,0 100,4 You could get the excel-sheets per email if you want | ||||
|
Aristoteles (384 – 322 v. Chr.) Wer Sicherheit der Freiheit vorzieht ist zu Recht ein Sklave
|
||||
| ||||
|
Thank you I shall take you up on that.
![]() | ||||
|
Grüße Anthony GB
|
||||
| ||||
arrrgg i have to change axle ratio! do you know if it's possible to swap them ? | ||||
|
||||
| ||||
|
David,
For all intensive purposes one cannot change the gears in the axles of the C304 TGB13 this is because of the PTO from the centre axle. I understand that there is not enough space to change ratios in this axle. So we are stuck with it, unless one perhaps can have something specialy made, I do not know. ![]() | ||||
|
Grüße Anthony GB
|
||||
| ||||
|
re-aaarrrrg so bad news....
is there any photo on this board of axles who show the difference between c304 and c303 ? | ||||
|
||||
| ||||
|
I do not know of a photo but perhaps WJM might have one or Dennis of Linden Engineering http://lindenengineering.com could well have. Dennis has taken them apart and has done most things possible with these Vehicles, he can also be found on
http://www.real4x4forums.com/PinzgauerBBS/index.php under the pseudonym of lindenengineering, he can also be fund on the Yahoo site using his name. He is in fact a British engineer who has settled in the US and has vast knowledge of all types of vehicles having worked in various parts of the World. | ||||
|
Grüße Anthony GB
|
||||
|
||||
| Michaels-Volvo-Offroader-Forum | SPEZIELLE THEMEN | Antriebskraft / power | « vorheriges Thema folgendes Thema » |









Autor







Gespeichert






