| Michaels-Volvo-Offroader-Forum | SPEZIELLE THEMEN | Bremsspur / brakes | « vorheriges Thema folgendes Thema » |
|
||||
Autor
|
Thema: Brake bleeding is a nightmare (Gelesen 666 mal) | |||
| ||||
|
**Hi friends, checking in again from Spain and looking for some help.** I’ve recently replaced some brake lines and two damaged cylinders. After that, I bled the brakes following the manual instructions—except for the step about removing the pressure-difference sensor between the two circuits. Now the problem: the brake pedal goes all the way to the floor, and only after one pump does it start to build some pressure. Even then, braking feels poor, especially on the front axle. The rear wheels seem to lock up, though. I’ve bled the system again using a lot of brake fluid—it helped a bit, but not much. When I press the pedal, the fluid level in the left reservoir drops, and when I release the pedal, the level rises again. Does anyone know what could be causing this? Could it be an issue with the servos? Is there an easy way to check them? I’m getting married this weekend, and for our honeymoon we’re driving to Ireland and sleeping in the car—so I really need to sort this out before we go. I'm a bit nervous about hitting the road with the brakes in this condition. Thanks in advance, friends! | ||||
|
||||
| ||||
|
....have you also bleeded the brakebooster.
There ist No bleedingvalve, so just open the screw on top with the brakelines. Good luck | ||||
|
||||
|
||||
| Michaels-Volvo-Offroader-Forum | SPEZIELLE THEMEN | Bremsspur / brakes | « vorheriges Thema folgendes Thema » |









Autor








Gespeichert