Michaels-Volvo-Offroader-Forum | SPEZIELLE THEMEN | Bremsspur / brakes | « vorheriges Thema folgendes Thema » |
|
||||
Autor | Thema: Brake master cylinder replacement (Gelesen 1370 mal) | |||
| ||||
Hello,
Does anyone have any ideas for a brake master cylinder replacement? Are there any easy master cylinders that will swap in place of the OEM Volvo C304 master cylinder? I only found one OEM replacement from a swedish site and it was over $800!!! | ||||
|
||||
| ||||
bumping this thread...we are still looking for a master cylinder replacement OR if there is a brake master cylinder rebuild kit, that works too. we have 0 brake pressure, but we used a pressure bleeder and all the lines have fluid in them with no leaks...so we think the master cylinder is bad.
| ||||
|
||||
| ||||
Hallo
Try to polish the inside of the zylinder with oil as I did. An issue kit you will get from Friese. Regards Christian | ||||
Warum nur einen Volvo, wenn man auch zwei haben kann
|
||||
| ||||
I just rebuilt mine last week. Not sure it works as new since I have so many other brake issues at the moment. I ordered my rebuilt kit from Claas. The only issue I have with the rebuilt kits is that they should come with copper washers for the section where the flare nuts attach. Mine has a small weep from trying to re-use the old copper washers.
Definitely worth trying to rebuild. No way I would spend $900 on a replacement that requires remodeling. I'd go hydroboost first. | ||||
|
||||
|
Michaels-Volvo-Offroader-Forum | SPEZIELLE THEMEN | Bremsspur / brakes | « vorheriges Thema folgendes Thema » |