| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |
|
||||
Autor
|
Thema: Rear view mirror woes (Gelesen 2192 mal) | |||
| ||||
|
I have different mirror arms on the driver and passenger side respectively. Is this correct?
Driver side: ![]() Passenger side: ![]() The driver side mirror points towards the vehicle too much, but I cannot adjust it any further at the mirror head Is there another way to adjust it ![]() Maurice | ||||
|
||||
| ||||
|
Sigh
Seems bending the driver-side arm will be the easiest approach. I really don't understand this, I'm 1.8m tall, regular height for a 1970s soldier... unless of course the arm has already been bent in the past...Maurice | ||||
|
||||
| ||||
|
Interesting that the parts catalogue shows two types, #12 and #31, but #31 is only for the TGB20 and Malaysia-spec vehicles.
![]() I also note that 4x4 and 6x6 mirror arms have different part nos. ![]() A quick Google search shows plenty of C303 with driver side mirrors like my passenger side one. Maybe I should post in the "Gesuche / requests" section Maurice | ||||
|
||||
| ||||
I'd never heard of them until you mentioned it here. Now I've done some research (see below) I agree wholeheartedly, that's the way to go. Instead of bending the current arm, I need to replace it with one like on the passenger side. Thanks Maurice References: https://www.c303.de/c303-forum/index.php?board=35;action=display;threadid=14147 https://www.c303.de/c303-forum/index.php?board=1;action=display;threadid=14316 | ||||
|
||||
| ||||
|
Problem solved. Replacement mirror arm from Tatanka and new Spafax mirrors
![]() ![]() I'd have bet money that a used mirror arm from Tatanka would be green, but no, it's black. They also didn't include the plastic plug ![]() Overall very happy though, thanks again for the advice. Maurice | ||||
|
||||
|
||||
| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |









Autor








Is there another way to adjust it 
Gespeichert
Seems bending the driver-side arm will be the easiest approach. I really don't understand this, I'm 1.8m tall, regular height for a 1970s soldier... unless of course the arm has already been bent in the past...



