| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |
|
||||
Autor
|
Thema: Rear view mirror woes (Gelesen 2190 mal) | |||
| ||||
|
I have different mirror arms on the driver and passenger side respectively. Is this correct?
Driver side: ![]() Passenger side: ![]() The driver side mirror points towards the vehicle too much, but I cannot adjust it any further at the mirror head Is there another way to adjust it ![]() Maurice | ||||
|
||||
| ||||
|
That was the same on my TGB. I also asked myself why
. But it didn't bother me too much. I switched to better mirrors, (Spafax). That's why I cut the left pice off. Also, I cut the mirror arms as much as possible to get a better clearance profile. | ||||
|
||||
| ||||
You live in the country of Spafax....;)) (your mirrors also seem to attach differently; and even the paint on the door bracket suggests some altercation at some point during its service(d) life) Given that you probably already have a mismatch, I wouldn't hesitate bending the passenger-side arm a bit (twisting it onto the vertical arm is probably much more difficult, and requires removal from the door bracket anyway). NB: the only other design you might/could encounter, as spare part, are units from the TGB1111/cabrio; these have an additional pivot joint, allowing the entire arm to rotate downards. (but the pivot also goes into the door, so it won't fit a regular door, at least not without drilling a new hole) | ||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||
| ||||
|
Sigh
Seems bending the driver-side arm will be the easiest approach. I really don't understand this, I'm 1.8m tall, regular height for a 1970s soldier... unless of course the arm has already been bent in the past...Maurice | ||||
|
||||
| ||||
|
Interesting that the parts catalogue shows two types, #12 and #31, but #31 is only for the TGB20 and Malaysia-spec vehicles.
![]() I also note that 4x4 and 6x6 mirror arms have different part nos. ![]() A quick Google search shows plenty of C303 with driver side mirrors like my passenger side one. Maybe I should post in the "Gesuche / requests" section Maurice | ||||
|
||||
| ||||
|
Malaysia is RHD, probably the main difference.
Mind you: the Malaysian batch preceeds the TGB20 by at least half a decade, yet their C304/6x6/LWB also being identical to the civil C306/6x6/LWB (Sweden/Danmark) in one very particular aspect: the frame(-holes), steering-wise: allowing to mount the steering gear on either side. | ||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||
| ||||
I'd never heard of them until you mentioned it here. Now I've done some research (see below) I agree wholeheartedly, that's the way to go. Instead of bending the current arm, I need to replace it with one like on the passenger side. Thanks Maurice References: https://www.c303.de/c303-forum/index.php?board=35;action=display;threadid=14147 https://www.c303.de/c303-forum/index.php?board=1;action=display;threadid=14316 | ||||
|
||||
| ||||
They came on my c306 firetruck, straight from active duty, otherwise I might not have known about them for several more years either....:)) So even historically they can be justified.....:)) To be fair, its latest deployment was next to Sweden's largest privately-owned car museum, firechief being owner of the museum, plus the castle around it, while commanding a navy subarine in his day job, so their view on all things automotive, replacement- & aftermarket-parts included, was probably much more global than mine....:)) | ||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||
| ||||
|
Problem solved. Replacement mirror arm from Tatanka and new Spafax mirrors
![]() ![]() I'd have bet money that a used mirror arm from Tatanka would be green, but no, it's black. They also didn't include the plastic plug ![]() Overall very happy though, thanks again for the advice. Maurice | ||||
|
||||
| ||||
|
Don't forget to keep a spray-bottle of de-icer ready, to avoid scratches in winter....;))
(Spafax does make heated versions) (also available in bright orange (and yellow, IIRC), for the colour-happy (or safety-attentive) folks among us) | ||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||
|
||||
| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |









Autor








Is there another way to adjust it 
Gespeichert
. But it didn't bother me too much. I switched to better mirrors, (Spafax). That's why I cut the left pice off. Also, I cut the mirror arms as much as possible to get a better clearance profile.

Seems bending the driver-side arm will be the easiest approach. I really don't understand this, I'm 1.8m tall, regular height for a 1970s soldier... unless of course the arm has already been bent in the past...



