| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |
|
||||
Autor
|
Thema: Nato-Kupplung (Gelesen 3730 mal) | |||
| ||||
|
Moin moin,
es gibt übrigens nato-kupplungen mit TÜV-segen in ottersbergbei bremen beim land-rover-service-gmbh. aktuell nur neu, gelegentlich aber auch gebraucht. habe so eine vor bestimmt 10 jahren jahren mal an meinen landy verbaut und problemlos eingetragen bekommen. habe gestren nachgerfragt; es gibt sie immer noch.... grüße lars | ||||
|
||||
| ||||
|
NATO couplings or pintle are easy to buy from Ex Military dealers certainly in GB. If you want any addresses just ask. their are plenty and the cost is very reasonable used. I think that the ones used here are better than already fitted to the TGB and can be viewed on the link below. They can be locked so that they can allow rotation or be locked to prevent it.
Dixon Bate can supply brand new ones and the have TUV status. http://www.dixonbate.co.uk/ http://www.dixonbate.co.uk/Towing/pintles.asp The light pintle is the one most suitable and is used on landrovers. http://www.dixonbate.co.uk/towing/product.asp?PartNo=FV987958 Make sure that any bolts used are high tensile | ||||
|
Grüße Anthony GB
|
||||
| ||||
|
/)Hab an meinem C202 ne Nato-Kupplung dran (fest, nicht rotierend), nur:
Was macht man eigentlich mit so nem Teil? (außer dass die Optik recht cool ist und außerdem n netter Aufkleber vom Vorbesitzer noch draufpickt) | ||||
![]() 1980er C202 Islandversion; 1982er C202 historischer Expeditionsumbau aus Erstbesitz; 3 GrandCherokees (1x Serie, 1x Allround-Umbau, 1x Offroad-Umbau); 90er Chrysler LeBaron 3.0 Cabrio; 1976er Volvo 264 H-Kennzeichen; usw.
|
||||
| ||||
|
Das Problem an der Nato-Kupplung der Landy´s ist aber das Lochbild.
Und das passt nicht an unsere Volvo´s ![]() | ||||
|
viele Grüsse Frank http://www.auf-allen-vieren.de
|
||||
| ||||
|
Das Lochbild unserer Volvo beträgt 120mm*55mm. Da gibt es bei Rockinger schon welche, aber die nette Kombination Zugöse/Kugelkupplung habe ich noch nicht (in zulassungsfähig) gefunden.
Wir hatten schon mal hier über AHK diskutiert. | ||||
|
||||
| ||||
|
zum anbau an den 303er kann (noch) nichts sagen, glabe aber, dass man über eine kupplungsplatte schon einen anbau realisieren kann. mit tüv-gestempelter nato kupplung ist halt die eintragung oder benutzung nicht von der jeweiligen laune des prüfers abhängig (so meine erfahrung aus früheren zeiten)
| ||||
|
||||
| ||||
|
Yankey is correct the mounting wholes for the Dixon Bate NATO pintle are a different spacing than the Volvo I rank Dixon bate and even the Medium Pintle does not match.
A mounting plate could easily be made up however, bolting the mounting plate to the Volvo and then drill and mount the NATO Pintle. | ||||
|
Grüße Anthony GB
|
||||
| ||||
|
Hallo
ich habe die Rockinger vario dran, klar eingetragen so ein Teil hat die nötigen Papier, ich finde sie wirklich gut bin hoch zufrieden leicht zu handeln und bei Bedarf erweiterbar. Ich habe Kugelkopf und modifizierte Nato, ist auch eine kliene Maul möglich. Im Gelände mag ich einfach die Nato am liebsten, Seil einfach einhängen und ist fest. Bisher habe ich weitgehend nur andere rausgezogen, wenn ich steckte ging es mit der Winde. Karl | ||||
|
||||
| ||||
The heavy pintle (7.5 ton, contrary to 4 ton with the light unit) is not certified, AFAIK.... Also note that even though both Dixon-Bates units are lovely compact, they only rotate, they are not dampened in a rubber gasket like the Rockinger 232....but that one builds *much* longer, to the point that I have an intuitive objection against it.... (or better: on a civil Volvo tow bar, one can not apply the same 'go-through' design like the original military Volvo, because it is a closed metal profile, not a plate) The German shop Nakatenga sells the Rockinger for 299 euro. But, like the Dixon-Bates, it fails on the Volvo due to incorrect bolt-spacting 120x56, IIRC; normal is 83x56, 85x45 or 101,6x101,6 (the Rockinger can be had in all the latter 3, but not the Volvo, like Dixon-Bates)) Willem (still pondering deeply how to maintain his original civil 60mm ball-coupling, while adding a Nato-jaw, without interference{*}) Jan {*} See here my dilemma: http://www.markerink.org/WJM/HTML/Volvo_Exhaust_2006-04-26\C306_Exhaust_2006-04-26_39.jpg Btw, for those freaks who like a combination of over-engineering & flexibility: for 50mm ball heads on the vehicle, and 40mm DIN-type eyes on the trailer, there are adapters on the market, both ball-side and coupling-side (the latter could be altered to 60mm of course, but all that would still not gain the robustness & rotational freedom of a true eye/jaw connection). (and both types are so hideously expensive (400 euro) that they don't make much sense anyway) PS: anyone ever witnessed Volvo selling surplus dealers who charge the exact same 5000 euro for *every* type and condition of vehicle, regardless whether 4x4/6x6/alu-zink/rotten-rust/dismantled? It *is* a way to make life simple, since they also refuse discounts, no matter how many you buy....:)) (of course, at a first-come-first-serve basis, you *can* pick the best ones, for that 5000 euro....and over time, the most rotten samples remaining on the lot for years, price might drop steadily....but still) | ||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||
| ||||
Btw, in that context I recently discovered that you can get 'nut-serts' (nuts mounted like pop-rivets) up to M12, and a plate thickness between 1.6 and 12.7mm (3 different ranges of thickness). That would avoid having to make a thick/hollow plate, and having bolts on the backside. | ||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||
| ||||
|
And indeed 120x55mm, not 120x56mm....;))
| ||||
|
*Verkaufe Battery-Equalizer/Charge-Balancer/Wandler 24->12v/100A* Those who wander are not necessarily lost J.R.R. Tolkien ...and not all who launder are washed/WJ....;)) <w.j.markerink@A1.NL>
|
||||
| ||||
"oh, for sure, you can do it with a normal streetcar...."
|
||||
| ||||
|
Moin,
mit dem schweizer Haken kann man eh nichts anfangen. Die Natoöse passt da nicht rein. Bei den schweizer Unimog 404 muß man die gesamte Hecktraverse tauschen, um eine normale oder Nato-Kupplung mit gängigem Lochbild anzuschrauben. Die Schweden benutzen ja nun auch die Nato-Hakenkupplung. Warum hat der Volvo denn 120mm x 55mm? Der Unimog begnügt sich mit 83mm x 56mm für eine K1D mitt 400kg Stützlast und 4t-Anhängelast bei Zentralachsanhängern. Eine K2D würde aber anscheinend ins Lochbild passen und die gibt es ab und an bei E-Bay recht günstig. Gruß Stefan | ||||
|
||||
|
||||
| Michaels-Volvo-Offroader-Forum | VOLVO C30x und Verwandte | C303/C304/C306 + TGB-11/13/20/1111 | « vorheriges Thema folgendes Thema » |









Autor







Gespeichert






