| Michaels-Volvo-Offroader-Forum | SPEZIELLE THEMEN | Antriebskraft / power | « vorheriges Thema folgendes Thema » |
|
||||
Autor
|
Thema: Viscous fan coupling (Gelesen 3398 mal) | |||
| ||||
|
A topic that has been covered before I know, but I coincidentally found this post at Facebook showing what seems to be a relatively simple and elegant modification to the mechanical fan.
Image courtesy of Olaf Dressel. ![]() https://www.facebook.com/groups/174390316032333/posts/2216148618523149/ He writes that "it needs a 60mm hole in center and 4 drills to adapt the visco. The original connector should swapped 180deg and planned". I don't understand the second sentence - any suggestions? I don't Facebook or I would ask directly Maurice | ||||
|
||||
| ||||
|
Ah, OK, so it's not as simple as I first thought.
Thanks Maurice | ||||
|
||||
| ||||
|
Unfortunately I won't be able to join the March meeting, but I'm definitely interested to learn more.
Maurice | ||||
|
||||
| ||||
Northern England, near Newcastle upon Tyne ![]() | ||||
|
||||
| ||||
|
Thank you very much
| ||||
|
||||
| ||||
|
I'm still interested to learn more about this...
| ||||
|
||||
| ||||
|
Dredging up an old topic but...
Does anyone know if the 164 fan is compatible with the C30x? ![]() Maurice | ||||
|
||||
| ||||
Thanks, it's extremely unlikely that I would find that post using the search mechanism. My idea is to mount the B30 fan in the same place as the current non-viscous one, hoping that (a) I don't need to modify the existing flange and (b) it won't be so far forward that the fan blades are outside the protective frame. Thus you could easily swap back if preferred or required. If it's not the case, then I will follow the same path as KingCreole and OlliD. Maurice | ||||
|
||||
|
||||
| Michaels-Volvo-Offroader-Forum | SPEZIELLE THEMEN | Antriebskraft / power | « vorheriges Thema folgendes Thema » |









Autor







Gespeichert

